1 / 2

Best Roofing Contractor In Perth, Australia | Roofing2000

How to Clean Mold Off a Roof. It's easy to let a mold problem sneak up on you on in out-of-the-way places like the roof of your home. Find out few steps to follow & you can easily remove mold from your roof.

roofing2000
Download Presentation

Best Roofing Contractor In Perth, Australia | Roofing2000

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How To Remove Mold From Roof? What You’ll Need ? Hose Plastic sheeting or tarps (optional) Rubber gloves Breathing mask Bucket Bleach Water TSP Handheld pump sprayer Mold stains can form on roof shingles that are in permanent shade. These stains will discolor your roof and damage the shingles over a period of time if left alone. Extensive mold growth can also expose the interior of your attic or crawlspace to mold spores, carrying the problem over to the inside.

  2. How To Remove Mold From Roof? Not to worry, though, because you can clean the mold off with basic household bleach and save your roof long before you need an expensive replacement. Follow the steps below to remedy this problem. Step 1 - Protect Your Plants and Lawn Splash the plants and parts of your lawn that are close to the sides of your house with water to protect them from the bleach solution. You can also cover them with tarps or plastic sheeting, which will protect the soil around your plants as well. Make sure that you create a wide radius around your home to be safe. Step 2 - Make and Apply the Bleach Solution Put on rubber gloves and a breathing mask before proceeding you so you can protect your skin and your lungs from the fumes produced by both bleach and trisodium phosphate. In a two-gallon bucket, create a cleanser composed of 1/4 chlorine bleach and 3/4 water. Then, add one tablespoon of trisodium phosphate (TSP) and mix well. Fill a handheld pump sprayer with the solution, and apply it to the moldy shingles only. Step 3 - Check for Cleanliness and Rinse Allow the solution to soak into the shingles for at least 15 minutes. If they are severely molded, you may want to give it a little longer. Next, rinse the shingles thoroughly with a garden hose at low pressure. Start from the top shingle and rinse downward to prevent water seepage. Run your gloved hand over the shingles to check for any slimy mold remaining after you're finished rinsing. If some remains, apply the cleanser again, wait 10 more minutes, and repeat the rinse process. Step 4 - Take Precautions Never use a pressure washer to wash or rinse shingles. The concentrated jet will scrape off the small pebbles on top of the shingles and reduce their water repellency, which will only make your mold situation worse.If you have a consistent problem with mold growth on your roof, consult a roofing professional. Your shingles may be old and in need of replacement, or just in need of waterproof coating to help prevent them from getting too wet.

More Related