1 / 5

TRD GTU – Status Hardware / Commissioning

TRD GTU – Status Hardware / Commissioning. Jochen Thäder Kirchhoff Institut für Physik Ruprecht-Karls- Universität Heidelberg. Full TRD Readout Chain. L1 contribution + busy. Optical Readout Interface (ORI) Global Tracking Unit (GTU) Track Matching Unit (TMU)

rory
Download Presentation

TRD GTU – Status Hardware / Commissioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TRD GTU – Status Hardware / Commissioning Jochen Thäder Kirchhoff Institut für Physik Ruprecht-Karls-Universität Heidelberg

  2. Full TRD Readout Chain L1 contribution+ busy • Optical Readout Interface (ORI) • Global Tracking Unit (GTU) • Track Matching Unit (TMU) • Supermodule Unit (SMU), Trigger Generation Unit (TGU) 12x 2.5 GBit/s, 850 nm GTU Racks TGU CentralTriggerProcessor x 8 1 5x TrackConcentr. 6 x TriggerDesign Trackletsonly Half Chamber ORI TTC triggersignals TriggerHandling &Control DCSBoardTTCrx RX 12 fibres ORI Event BufferingDesign HLT DDLSIU Module Tracklets&Raw Data DAQ TMU SMU Stack 5 x GTU Supermodule Segment Front-End Electronicswithin L3 magnet Racks belowMuon System DDL ~100 MByte/sevent data transfer with flow control

  3. Simulated Event Replay • one SD card for simulated event data ofone stack (12 optical 2.5 GBit/s links) • each TMU board capable of 30 GBit/s input stream during optical readout,impossible to produce such data rates withsimulation event data stored on SD cards busy GTU Racks SD CardforsimulatedEvent Data TGU CentralTriggerProcessor Event ReplayControl x 8 1 5x 6 x Half Chamber 12x electrical loopback ORI TX TTC triggersignals TriggerHandling &Control DCSBoardTTCrx RX 12 fibres ORI Multi-Event BufferingDesign HLT DDLSIU Module SimulatedEvent Data DAQ TMU SMU Stack 5 x GTU Supermodule Segment

  4. Event Data / Rates • full data of all 18 TRD supermodules • ~3 MByte / event (uncompressed) • 1 GByte flash memory cards (SD Cards)  ~ 1600 events • very low rate for uncompressed events: ~ 5 Hz • reasons: • maximum rate for flash cards in SPI mode • only one flash card available for the six modules of one stack  5 cards per DDL

  5. Current Status • TRD/GTU hardware / framework (CTP, DAQ)installed / ready • SD Card controller under development(ready about week 47) • Event replay controller (card data → injection into GTU inputs)(ready about week 47) • simulated event data being prepared • 120 SD Cards(expected week 45)

More Related