1 / 32

Simulating the sheltering effects of windbreaks in urban outdoor open space

Simulating the sheltering effects of windbreaks in urban outdoor open space. Wei Li , Fan Wang , Simon Bell. Speaker :古緯中. Introduction Wind tunnel experiment Numerical Result and analyses. Introduction. Introduction. Windbreaks. Buildings. Introduction.

Download Presentation

Simulating the sheltering effects of windbreaks in urban outdoor open space

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Simulating the sheltering effects of windbreaks in urban outdoor open space Wei Li , Fan Wang , Simon Bell Speaker :古緯中

  2. Introduction • Wind tunnel experiment • Numerical • Result and analyses

  3. Introduction

  4. Introduction Windbreaks Buildings

  5. Introduction A common feature of these studies is that the windbreaks are considered in a fully open space, such as an area of countryside, with no obstruction in its vicinity or else such objects are so small relative to the size of the windbreaks that their influence is negligible. In a built-up area of an urban environment, however, the presence of buildings can no longer be ignored.

  6. Introduction

  7. Wind tunnel experiment 2.1 Wind tunnel and models The boundary layer wind tunnels in Building Research Establishment Ltd. (BRE) and Heriot-Watt University (HWU) are both capable of simulating the atmospheric boundary layer at approximately 1:150–1:400 scales. Calibration for the speed measuring of the hot wires was made at the beginning of each day of measurement or at every change of probes.

  8. Wind tunnel experiment 2.1 Wind tunnel and models

  9. Wind tunnel experiment 2.1 Wind tunnel and models 1 : 200

  10. Wind tunnel experiment 2.2 Wind flow profile

  11. Numerical simulation 3.1 Modeling the windbreak The mean momentum equation by Hoerner (1965) :resistence coeffocoent :porosity

  12. Numerical simulation 3.2 Governing equations The drag force For the narrow vegetative or artificial windbreak, the porosity or penetrability is equivalent to the optical porosity, which can be acquired by taking black–white pictures behind a windbreak and counting the percentage of the white area.

  13. Numerical simulation 3.3 Turbulence models The KE model The KE modelis by far the most widely used two-equation turbulence model. The KE-two-layer (KE-2L) model The KE-two-layer (KE-2L) modeis the revised KE model, which uses the high-Reynolds-number KE model only in the fully turbulent region, away from the wall, and the near-wall viscosity-affected layer is resolved with a one-equation model. The KE-RNG The KE-RNG is calculated by re-normalization group (RNG) methods giving somewhat different values.

  14. Numerical simulation 3.4 Discretization schemes The finite-volume method (FVM) was used to discretize the governing equations, about which there are several kinds of differencing schemes. • The HYBRID differencing scheme • The QUICK differencing scheme • The SMART difference scheme

  15. Numerical simulation 3.4 Discretization schemes The HYBRID differencing schis based on a combination of central and upwind differencing schemes. The HYBRID differencing scheme The QUICK differencing scheme uses a three-point upstream-weighted quadratic interpolation for cell face values. It has greater formal accuracy than the central, upwind or HYBRID scheme. The QUICK differencing scheme The SMART difference scheme, as one of the non-linear schemes attempts to adapt the discretization to avoid the unwanted behaviour of the (QUICK) linear schemes, such as the unboundness. The SMART difference scheme

  16. Numerical simulation 3.5 Boundary conditions • Symmetrical conditions to lateral and top boundaries. • (2) Outflow conditions (no re-entry and no variable gradient) to outlet. • (3) Log-law wind speed profile to the inlet with k (turbulent kinetic energy) measured from wind tunnel experiments and ε (dissipation rate) calculated from k. • (4) Smooth wall conditions to the ground and surfaces of buildings and windbreaks.

  17. Result and analyses 4.1 The validation of CFD simulations At this stage, the first half of this study, simulation of the simplified built environment, one building and one tree belt, has been fully investigated in terms of the selection of turbulence models, the numerical schemes and the grid density.

  18. Result and analyses 4.1.1 On the turbulence models

  19. Result and analyses 4.1.2 On the dscretization schemes The best The worst

  20. Result and analyses 4.1.3 On the simulation of windbreak-only case

  21. Result and analyses 4.1.3 On the simulation of windbreak-only case From our simulation, a good agreement with the experiment has been achieved in the lee right behind the windbreak (within 8H). That the simulation working with KE-2L model and SMART scheme gave better description to the flow within and very close to the windbreak.

  22. Result and analyses 4.1.4 On the incoming wind directions

  23. Result and analyses 4.2.1 The wind flow regimes

  24. Result and analyses 4.2.1 The wind flow regimes

  25. Result and analyses 4.2.2The difference of porosity

  26. Result and analyses 4.2.3 The difference of distance When the distance was less than 4H, the standing vortex in front of the building dominated the lower part of the flow field. If the distance exceeded 4H, the penetrability of the fence became very important, or equivalent to the effect of the presence of the building.

  27. Result and analyses 4.2.3 The difference of distance

  28. Result and analyses 4.2.4 On the effect of vertical porosity variation

  29. Result and analyses 4.2.5 On the effect of the height of the building

  30. Conclusion and future works The changes of the flow regimes have been revealed both in CFD simulations and wind tunnel experiments (Figs. 5 and 10a). If windbreaks are not far away from buildings, e.g. within 4– 5H (windbreak’s height), the distance between them is the governing factor for the wind speed reduction, instead of the porosity of the windbreak. CFD simulations wind tunnel experiments

  31. Conclusion and future works To reduce wind speed on large areas, high-density windbreaks (20–30% porosity) should be given the first consideration in landscaping when buildings are sited at a short distance from windbreaks. For the numerical simulations, the KE-2L turbulence model would be a better choice for simulating airflow around windbreaks.

  32. Thank You For Listening

More Related