1 / 5

Macrospin Simulation Attempt

Macrospin Simulation Attempt. Simulation parameters. Ms=713000 A/m=485*12/16+1400*4/16=Average of Ms from Co and Ni K=3.55e5 J/m3 Anisotropy constant Thickness 1.6nm Area 100nmx100nm => Hk =100-101mT Use damping=0.02, reasonable value. Matching of current sweep.

royal
Download Presentation

Macrospin Simulation Attempt

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Macrospin Simulation Attempt

  2. Simulation parameters • Ms=713000 A/m=485*12/16+1400*4/16=Average of Ms from Co and Ni • K=3.55e5 J/m3 Anisotropy constant • Thickness 1.6nmArea 100nmx100nm • =>Hk=100-101mT • Use damping=0.02, reasonable value.

  3. Matching of current sweep • 0 Field Current sweep: 3.17mA,-7mA • ~0.02 dipolar field (extracted from asymetry of the hyst loop • -0.02 field current sweep : 4.4mA, -6.4mA • -0.02 field Extrapolated Ic=4.33mA • Change to asymetricsloncweski torque so that AP->P is 6.4/4.4 times more efficient than P->AP

  4. 800000 • 4.42

  5. Simulation parameters: • Factor of 60 with change in torque shape (4.4,6.4)=>4.42sim

More Related