1 / 27

DOSE SPACING IN EARLY DOSE RESPONSE CLINICAL TRIAL DESIGNS

DOSE SPACING IN EARLY DOSE RESPONSE CLINICAL TRIAL DESIGNS. Naitee Ting, Ph. D. Associate Director Pfizer Global Research & Development. STUDY 1 - WHAT’S NEXT?. STUDY 2. Questions in Designing the First Dose Response Study. How many doses to be tested? What are the high and low doses?

salome
Download Presentation

DOSE SPACING IN EARLY DOSE RESPONSE CLINICAL TRIAL DESIGNS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DOSE SPACING IN EARLY DOSE RESPONSE CLINICAL TRIAL DESIGNS Naitee Ting, Ph. D. Associate Director Pfizer Global Research & Development

  2. STUDY 1 - WHAT’S NEXT?

  3. STUDY 2

  4. Questions in Designing the First Dose Response Study • How many doses to be tested? • What are the high and low doses? • What are the spaces between the test doses (what is the dose spacing)? • How frequent should subjects be dosed? • How many subjects for the study?

  5. Dose Response Study Design • Selection of control • Selection of endpoints • Fixed dose vs titration dose • Two-stage designs vs Two designs

  6. Dose Response Study Design • In early Phase II, drug first tested in patients • Assume maximum tolerable dose (MTD) known, assume monotonicity • Efficacy response, toxicity response • Range and spacing of doses

  7. Limited Number of Fixed Doses • Concerns in interpreting titration dose • Multiple center designs • Formulation considerations • Placebo and maximum tolerable dose (MTD) • Incorporate active control?

  8. Considerations in Dose Allocation • Selecting a wide range of doses • Find doses to capture the steepest increasing portion of efficacy dose response curve • Use of some low doses to help identify the minimum effective dose (MinED) • Not very high to be too close to MTD

  9. Binary Dose Spacing • For 2 active doses, one above 1/2, one below • Continue with this fashion to the lower end • Any cut for 1/p, where p  2 • Non-parametric, model independent • Applies to titration design, sequential design, active control, early or late Phase

  10. Compare to Optimal Designs • For a given model, optimal design allocate doses according to D-optimality • The most frequently used model is logistic • Another model is normal cdf (with parameters m and s)

  11. Criteria for Comparison • Provide a steeper slope from placebo • Identify a minimum effective dose (MinED)

  12. Simulation Procedure • Ten and fifty obs. generated from each dose • Each obs. is normal with mean from model and standard deviation of 0.1 & 0.025 • Slopes from placebo to each dose • Assuming minimum effect is 0.2, MinED is obtained from lower 95% confidence limit

  13. Table 1. Treatment Group Means, Slopes From Placebo To Each Dose, And 95% Confidence Limits From Simulated Data Under Different Sample Sizes And Standard Deviations Simulation based on Model: with q1 =1.565 and q2 =4.174 BDS doses: Low = 0.125, Medium = 0.375, High = 0.750 Optimal doses: Low = 0.082, Medium = 0.375, High = 0.668 n/group = 10 n/group = 50 std. dev. =0.1 std. dev. =0.25 std. dev. =0.1 std. dev. =0.25 BDS Opt. BDS Opt. BDS Opt. BDS Opt. Mean (Pcbo) 0.1804 0.1516 0.1813 0.1926 0.1508 0.1747 0.1626 0.1802 Mean (Low) 0.2468 0.2315 0.3351 0.2153 0.2724 0.2439 0.2799 0.1382 Lower L -0.0153 -0.0133 -0.1039 -0.2009 0.0833 0.0311 0.0253 -0.1420 Mean (Med) 0.5223 0.5533 0.4792 0.4787 0.5133 0.4995 0.4834 0.4883 Lower L 0.2588 0.2958 -0.0451 0.0652 0.3261 0.2829 0.2230 0.2173 Mean (High) 1.8610 0.7624 0.8148 0.8436 0.8170 0.7544 0.7871 0.8005 Lower L 0.6068 0.5111 0.3679 0.4890 0.6292 0.5350 0.5164 0.5266

  14. Table 2. Simulation Results with 3 Active Doses Using a Logistic Model to Compare D-optimal Dose Spacing and Binary Dose Spacing of ½ distance 12 Low Medium High Overall MinED 2 4 B O B B BD2 2 6 B O O O OP2 2 8 B B O O OP2 2 10 B B O O BD1 2 12 B O O O BD1 2 14 B O O O BD1 2 16 B O O O OP2 2 18 B O O O OP2 3 6 O O B O BD2 3 8 O B O O OP2 3 10 O B O O OP2 3 12 O B O O OP2 3 14 B B O O OP2 3 16 B O O O OP1 3 18 B O O O BD1 4 6 O O O O OP1 4 8 O O O O OP1 4 10 O O O O OP1 4 12 O B O O OP1 4 14 O B O O OP1 4 16 O B O O OP1 4 18 O B O O OP1

  15. Table 3. Simulation Results with 4 Active Doses Using a Normal Model to Compare D-optimal Dose Spacing and Binary Dose Spacing of ½ distance 12 Low Low Med. Hign Med. High Overall MinED . 0.1 0.1 B B O O O BD1 0.2 0.1 O B O O O OP2 0.2 0.2 B B O O O OP2 0.3 0.1 O O B O O OP1 0.3 0.2 O O B O O BD2 0.3 0.3 B B B O O BD2 0.4 0.1 O O O O O OP1 0.4 0.2 O O O O O OP2 0.4 0.3 B O O O O OP2 0.4 0.4 O O O B B OP2 0.5 0.1 O O O O B OP1 0.5 0.2 O O O O O OP1 0.5 0.3 O O O O O BD3 0.5 0.4 O O O B B BD3 0.5 0.5 B B O B B OP2 0.6 0.1 O O O B B OP1 0.6 0.2 O O O O B OP1 0.6 0.3 B O O B O BD3 0.6 0.4 B O O B O BD3

  16. Table 4. Treatment Group Means, Slopes From Placebo To Each Dose, And 95% Confidence Limits From Simulated Data When The Underlying Model Is Mis-specified True Model: q1 = .38 and q2 = .32. Using optimal design, this model was mis-specified as q1 = .32 and q2 = .38 BDS doses: Low = 0.125, Medium = 0.375, High = 0.750 Optimal doses (mis-specified model): Low = 0.010, Medium = 0.320, High = 0.630 (the correct doses should be Low = 0.119, Medium = 0.380, High = 0.641) Simulation performed with n=20 per group and std. dev. = 0.25. BDS Dose Allocation Optimal Dose Allocation Point Point Lower L estimate Upper L Lower L estimate Upper L Mean (Pcbo) 0.1123 0.1976 Mean (Low) 0.0675 0.1958 0.0021 0.2141 Mean (Med) 0.3648 0.4955 0.2865 0.4997 Mean (High) 0.7420 0.8699 0.5797 0.7904 Slope Low 0.540 0.668 0.796 0.202 1.575 2.948 Slope Med 0.973 1.022 1.071 0.895 0.944 0.993 Slope High 0.989 1.010 1.031 0.921 0.942 0.962

  17. Conclusion • Assume MTD known and monotonic relationship • Intuitive and with wide applications • Model independent approach vs parametric optimality - Not much of a comparison • A general recommendation, not one size fits all

  18. Analysis of Dose Response Studies • Multiple comparison adjustment • Placebo control, active control, or both • Dunnett’s method, Step down method • Linear, quadratic dose response • Minimum effective dose (MinED)

  19. Analysis of Dose Response Studies • Drug safety in dose response studies • Estimation vs hypothesis testing • Exploratory vs confirmatory • Analysis of the entire database

More Related