1 / 13

Multichannel Sense-and-Avoid Radar for Small UAVs

Multichannel Sense-and-Avoid Radar for Small UAVs. Acknowledgements. Funding sources NASA – Leading Edge Aeronautical Research for NASA (LEARN) Madison & Lila Self Graduate Fellowship, KU Researchers Dr. Christopher Allen (PI) – Electrical Engineering Professor at KU

scout
Download Presentation

Multichannel Sense-and-Avoid Radar for Small UAVs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Multichannel Sense-and-Avoid Radar for Small UAVs

  2. Acknowledgements Funding sources NASA – Leading Edge Aeronautical Research for NASA (LEARN) Madison & Lila Self Graduate Fellowship, KU Researchers Dr. Christopher Allen (PI) – Electrical Engineering Professor at KU Dr. Mark Ewing – Aerospace Engineering Professor at KU Dr. ShahriarKeshmiri – Aerospace Engineering Professor at KU Graduate students Lei Shi, Mike Zakharov, Francisco Florencio, NahalNiakan, Robert Knight On-campus technical support Instrumentation Design Lab (IDL): Dr. Ken Ratzlaff, Robert Young

  3. Project Background

  4. System Specifications Platform – 40%-scale Yak-54 RC aircraft Sensor requirements • detection range 300 to 800 m • range accuracy 10 m • range-rate resolution 1 m/s • Doppler accuracy 10 Hz • update rate 10 Hz • field of view: azimuth – 360°elevation – 15° • angular accuracy 3°

  5. FPGA processing example results Emulated target signal 108 dB power 512.7 Hz Doppler 305.9 kHz beat freq 3-D graphic output Loopback setup with leakage using 800-m fiber delay line (584 m range), Input signal power -112 dBm, 500-Hz double-sideband modulation, output plot truncated in range and Doppler. Leakage Noise floor 85 dB Carrier Loopback anomaly

  6. Implementation – Radar Block Diagram • Radar-ready ICs: FMCW synthesizer & multichannel ADC • FPGA • RF subassembly • Antenna arrays

  7. Implementation – Digital System

  8. Implementation – RF subassembly Low Noise Amplifiers (LNA) SAW filter (surface acoustic wave) Splitters Mixers • One transmit channel • Transmit power ~ 0.5 W • Five receive channels • Receiver noise figure 3.5 dB • Receiver gain 64 dB • Weight approx 50 lbs • Size approx 1 m2 Low Pass Filters (High pass filters not shown) Power Amplifier

  9. Current Project Status • Radar prototype is being flight tested on Cessna Aircraft

  10. 502 Project – TX/RX Miniaturization • Miniaturize the radar to fly on the 40% Yak-54 UAV. • System target weight ~ 4 lbs • System target size ~ 8”x8”x8” (exact values are TBD) • Miniaturization will necessitate custom printed circuit assembly and possibly migration to a higher microwave frequency.

  11. 502 Project – Skills to be Developed/Used • High Frequency Circuit Design and Construction • PCB layout – Eagle CAD preferred • PCB construction using (small) surface mount components (SMCs) • RF chain characterization – oscilloscopes, network analyzers, etc. • Trouble shooting • MATLAB (maybe)

  12. You should consider this project if you… • Need to reinforce fundamental EE skills for industry or graduate school • Are interested in Radar systems • Want to participate in cutting-edge research • Like to make Aerospace Engineers happy • Haven’t had enough of working with Dr. Allen or myself

More Related