1 / 5

Rubbes Sheets Manufacturers & Suppliers

Get to us at American Seal & Packing for great quality Sheet Rubber. We are a leading manufacturer and distributor of Sheet Rubber in Ohio. Get to us to know more about our products, deals and services. Visit us at https://www.aspseal.com/gaskets/Rubber-Gaskets/

Download Presentation

Rubbes Sheets Manufacturers & Suppliers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sheet Rubber Rubber Gaskets Rubber Gaskets are recommended for low temperature applications such as washers and gaskets for the heating and plumbing trades. There are many different types of rubber sheet gasket material. Nitrile (Buna-N Rubber) Trade Names:

  2. Chemigum Hycar (Zeo (Goodyear)n Chemical) Ny Syn (Copolymer) Paracril (Uniroyal) Krynac (Polysar) Perbunan (Mobay) The most widely used elastomer. Excellent resistance to petroleum products. Excellent compression set, tear and abrasion resistance. Does not have good resistance to ozone, sunlight, or weather, unless specifically compounded. Should not be stored in direct sunlight or near motors or other electrical equipment which may generate ozone. Temperature range: -40° to +250°F. Fluorocarbon Rubber (Viton, FKM or Fluorel) Fluorocarbon (FKM) is a high tech. elastomer designed for extreme heat, oil and chemical resistance. Viton resists aliphalactic aromatic and halogenated hydrocarbons, concentrated acids, alkalis, animal and vegetable oils.- 75 durometer is preferred. Avoid colored (brown or green) grades; the clay fillers used to replace carbon black are subject to chemical attack. Temperature range: -20 F to +400 F EPDM Rubber - Ethylene Propylene Diene Monomer : EPDM is a black plate finish sheet with superior resistance to weathering, ozone and UV exposure. EPDM also provides excellent chemical resistance*, and good electrical properties.

  3. EPDM resists animal and vegetable oils, steam, water and oxygenated solvents. Peroxide cured grades are preferred. Temperature range: -65 F to +300 F Chloroprene (Neoprene Rubber) Trade Names: Neoprene (E.l. duPont), Butachlor (Ditsugil), Bayprene (Mobay) Moderately resistant to petroleum products. Good Ozone and weather resistance. Good compression set. Excellent for sealing refrigeration fluids such as Freon®. Temperature range -65o F to +250o F. Silicone sheet gasket material is a very versatile material ideal for a wide range of applications. Silicone rubber gasket material offers temperature resistance, weather (UV and ozone) resistance, and fire resistance . Silicone gasket material has very good compression set resistance allowing it to maintain a proper seal over many years. Temperature range: on most silicone gasket materials is -80o F to +450o F

  4. Red Rubber - Styrene Butadiene Rubber Sheet. Recommended for low applications such as washers and gaskets for the heating and plumbing trades. Low cost flange gasket material. Non-oil resistant compound that resists flow under compression. Offers moderate to good performance against low pressure. Good aging and abrasion resistance. Easily conforms to uneven flange load. Durometer - 75 ±10/-5. Tensile strength - 400 PSI. Temperature range: - 20°F to +180°F continuous/210°F intermittent. Red color. Cost: Low Aflas - Preferred for combinations of oil and amines or ammonia: sour crude oil, sour gas, refrigeration. Aflas is an elastomeric based flouorubber, a copolymer of tetrafluroethlene and propylene. This elastomer offers excellent chemical resistance qualities, with serviceability in the temperatures up to 550 degrees F depending on environment. Services where Aflas sheet might be applicable include inorganic acids, alkalis, high temperature steam, polar solvents, organic bases, hydrocarbon oils, amines and amine corrosion inhibitor systems, and hydrogen sulfide bearing fluids. -Temperature range: -20 F to +400 F (excursions to +600)

  5. Perfluoroelastomer (Kalrez, Chemraz) - Supplied for some chemical and high temperature applications. Kalrez compound 4079 is most common, and offers improved compression set resistance over compound 1050 For more info visit us at https://www.aspseal.com/gaskets/Rubber-Gaskets/

More Related