1 / 2

Low voltage notes (24.7.03)

Low voltage notes (24.7.03). Detector. 1). DC voltage. Transformer, rectifier, simple filter. Low Voltage Regulators, LVRs. 400Hz. One to 5 VFE cards. But No specification, DC supply not stable enough No tuning to special ECAL needs Difficulties, line reg’n, load reg’n. Detector.

season
Download Presentation

Low voltage notes (24.7.03)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Low voltage notes (24.7.03) Detector 1) DC voltage Transformer, rectifier, simple filter Low Voltage Regulators, LVRs 400Hz One to 5 VFE cards • But • No specification, DC supply not stable enough • No tuning to special ECAL needs • Difficulties, line reg’n, load reg’n Detector 3 phase or single A/C standard mains 2) Regulated power supplies Want 10 tower trigger module, 250 ch LVRs, one to 5 VFE cards Large cables or bus bars Weiner/CAEN at carts or counting room • But • can’t get enough power from existing regulated power supplies • Proposal to “parallel up” from the P/S • if want 3A, but max 2A, need 2 together for capacity BUT must equal current sharing, where is sense wire? • Ie for 250 ch, potentially 5 different senses going back to ganged P/S. What will be defining what?

  2. Low voltage notes (24.7.03) Bus bar modularity: 28 x 70 mm2 bus bars, 1 bus bar is 70 mm2 4 voltage rails + 5V Dig +2.5V Dig +5V Analogue -2V Analogue The sense at end of each substantial bus bar on Dee, if needed, But STILL no P/S with enough current o/p Bus bars per Quad ??????????????

More Related