The Process Of Mold Remediation

1. Article: Servicemasterbyar.com THE PROCESS OF MOLD REMEDIATION Mold is nothing but a fungus that tends to grow in your surroundings. It usually enters your home or workplace in the form of tiny spores, and as soon as these spores come in contact with moisture, they start growing and are very harmful to your health and household articles. They are very easy to locate as they originate in humid or soggy areas. They grow very fast and can sometimes cause severe damages to your property. You can definitely remove it yourself, but to get rid of it on a full extent it’s advisable to call for professional help as they will help you to eliminate the problem, inspect the whole property in case there is any other place with molds and will give the proper advice for avoiding it to grow back again. Good mold removal companies do not start to remove the mold till they determine if the mold is really present or not. But in case they do find it, they will show it you and find place of its origin. It may be black, greenish black, wet or even slimy to the touch. They will also tell you the reason of its formation. After this, a full-blown mold remediation and elimination process begins. For this, the contractor will have to close the affected area completely ascertain types of molds reproduce and can be harmful to humans as they release the spores into the air. As the mold removal process involves blowing, a large amount of these spores can get scattered around. So they use plastic sheeting and taping in order to avoid contaminating other parts of your property. In case more than one room is affected, they clean one room at a time. After blowing comes filtration. The contractors mostly use air filtration machines equipped with HEPA filters for decontaminating the air in and around the affected area. As they too can get affected by these molds, they have to wear their safety gear throughout the process that includes goggles and air filter masks. The next part is the mold removal work which is the rough part. Materials like hard plastic and glass are easier to clean as the mold has no corners and nooks to hide in. But for severe infestation, your remediation contractor might have to remove a good amount of porous material, whilst wood or concrete. This might be because the mold may have visibly destroyed the material. Like every other living organism, a mold tries to survive and reproduce; therefore it tends to hunker down in the pores of a concrete basement or that of a wooden windowsill. Therefore, if the mold is deeply embedded, you might have to lose some amount of your stuff. After this, the contractor will inform you when the room is ready for use and what precautionary measures you should be taking so as to avoid going through this problem again. It is always better to call for professional help than dealing with the problem yourself as it can cause a threat to your health or you might not be able to clean it properly which can result in its re-growth. For more information on Mold Removal in long island visit www.servicemasterbyar.com

2. Article: Servicemasterbyar.com ABOUT THE AUTHOR Jeremy Johnson is an expert in house restoration techniques and services, and has been in the profession for more than ten years. He explains that molds are the cause of serious damages in the home, and recommends www.servicemasterbyar.com for mold remediation in Long Island.