1 / 28

ECE 477 Design Review Team 01  Fall 2013

ECE 477 Design Review Team 01  Fall 2013. Paste a photo of team members here, annotated with names of team members . Outline. Project overview Project-specific success criteria Block diagram Component selection rationale Packaging design Schematic and theory of operation PCB layout

sharla
Download Presentation

ECE 477 Design Review Team 01  Fall 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 477 Design Review Team 01  Fall 2013 Paste a photo of team members here, annotated with names of team members.

  2. Outline • Project overview • Project-specific success criteria • Block diagram • Component selection rationale • Packaging design • Schematic and theory of operation • PCB layout • Software design/development status • Project completion timeline • Questions / discussion

  3. Project Overview • Android controlled quadcopter • Bluetooth connection (~300 foot range) • GPS, compass, ultrasonic, battery monitor • Brushless DC motors with speed controllers • PWM input flight controllerboard for stabilization • Waypoint navigation & auto take-off/land

  4. Project-Specific Success Criteria • An ability to determine the position of the quadcopter using GPS • An ability to control the copter using an Android device over a Bluetooth interface • An ability to automatically take-off and land • An ability to fly-by-waypoint using GPS coordinates • An ability to monitor the state of battery charge and relay back to user

  5. Component Selection Rationale • Microcontroller • 5 PWM, 1 SPI, 3 UART, 4 A/D • Spare ports • Speed and flash not a constraint • Peripherals • 3.3 volts • Physical size • Bluetooth – range (~300ft) • GPS – accurate, interference • Magnetometer – motor interference

  6. Component Selection Rationale • Microcontroller (PIC24FJ256GB110) • 3 SPI, 3 I2C, 4 UART, 9 PWM, 16 A\D • 16 Bit • 85 I/O pins, 100 pins total • 8 MHz Internal Oscillator • Good documentation and support • All peripherals on 3.3 volts • All peripherals on breakout boards that are small enough

  7. Switching Voltage Regulator

  8. Vref Voltage Regulator

  9. Voltage Divider

  10. Line Level Translator

  11. Programming Header

  12. Software Design/Development Status • Development with PIC24FJ128 • No Peripheral Pin Select (PPS) • Ordered PIC24FJ256 with PPS Plug-In Module (Thank you Joe!) • UART practice (RFID) • Heartbeat, Reset, Bluetooth, Proximity • Android app developed • Software flowchart (very modular)

  13. Thank You!Questions / Discussion

More Related