1 / 53

Interface Gold Standard Calibration System

Interface Gold Standard Calibration System. Developed in 1989, Interface, Inc. began to market the Gold Standard ™ System in 1991. It is now used in more than 250 labs throughout the world. INTERFACE. Gold Standard TM Load Cell Calibration System.

shelley
Download Presentation

Interface Gold Standard Calibration System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Interface Gold Standard Calibration System

  2. Developed in 1989, Interface, Inc. began to market the Gold Standard™ System in 1991. It is now used in more than 250 labs throughout the world. INTERFACE

  3. Gold StandardTM Load Cell Calibration System One 9840 2 Channel Indicator for Load Cell Exitation/ Signal Conditioning One ICS-202 Force Calibration Software One SIS-103 One-Day Training at Interface One CT-139-10 SCB1 to GS Load Cell Cable One CT-142-10 SCB1 to Standard Load Cell Cable One CX-0440 mV/V Transfer Standard One SIS-104 System Setup INTERFACE

  4. Interface Gold StandardTM Calibration Systems Controlled calibration process reduces calibration times by 50% to 90% and produces consistent calibration results Easy-to-use software reduces operator training time Fully integrated reporting functions Automatic archiving of calibration results Supports ASTM E74, ASTM E4 and ISO 7500/1, EH10002 Industry Accepted terms and calculations 0.1µV display resolution Used in over 250 calibration labs world-wide INTERFACE

  5. Gold StandardTM Calibration System Options GS-USB: Provides USB interface for HRBSC, SCB1, DA-101 and HL4IO instrument boards includes internal power supply, cooling fan and USB cable. SCB1: 20 bit instrument board provides signal conditioning for the Gold StandardTM System. Available in single or dual channel versions. HRBSC: High-resolution 22 bit instrument board increases accuracy over the SCB1.  DA-101: Digital to analog board for generating command signal for system control. Provides setpoint signal for servo controlled hydraulic force testing. HL4IO: High level 4-channel input board allows calibration of ±5 and ±10 VDC output transducers and includes all features of the DA-101. Load Cell Simulator: mV/V transfer standards are used to calibrate the Gold StandardTM system, and for setting up and testing load cell readout devices. CX-0404 - specifically designed for instrument substitution testing as per ASTM E74. Desktop, laptop or portable PC: Contact factory for currently available configurations. Gold StandardTM or Platinum StandardTM load cells as required. INTERFACE

  6. 1600 Gold StandardTM Calibration Load Cell Tension and compression in one unit .005% nonrepeatability .01% creep High output - to 4mV/V High precision base installed 3 run NIST traceable calibration Factory installed calibration adapter Eccentric load compensated .0008%/°F temp. effect on output 4% lower load limit per ASTM E74 INTERFACE

  7. 1600 Gold StandardTM Calibration Compression Only Load Cell .005% nonrepeatability .01% creep High output - to 4mV/V High precision base installed 3 run NIST traceable calibration Eccentric load compensated .0008%/°F temp. effect on output 4% lower load limit INTERFACE

  8. Model 1800 Platinum™ SeriesLow Profile Load Cells .005% non-repeatability .01% Creep Designed to be used at 2% lower load limit .008% /°F temp effect on output Eccentric load compensated INTERFACE

  9. Model 9840 Intelligent Indicator INTERFACE • 24 bit internal resolution • +/-999,999 Count Bipolar Display • Nonlinearity <  0.005% • Stores calibration for up to 25 load cells • Fast, direct analog output •  VDC scalable analog output • Full duplex RS232C • Peak/Valley hold • Front panel and remote tare

  10. Precision mV/V Load Cell Simulator Most accurate load cell simulator. Special low thermal emf construction. Each unit individually calibrated, aged and recalibrated. Strong, rugged design. Instrument substitution testing. MDL CX-0404 is specifically designed for instrument substitution testing as per ASTM E74. INTERFACE

  11. Why use a simulator or mV/V Standard ? Calibrate Indicator or Signal Conditioner periodically Daily sanity check on measurements Establish true zero Check cables 11

  12. Model CX Standard 6 digit calibration 10 ppm uncertainty 12

  13. Shunt Calibration Technique of unbalancing bridge with external shunt resistor Less Expensive OK for medium-accuracy work Affected by preload, temperature, bridge resistance drift, cable length 13

  14. Transducer Calibration Procedures 14

  15. Machine Calibration Procedures 15

  16. Measurement Uncertainty Model, Calibrating Load Cell by Comparison 16

  17. Uncertainty Components CNS = Cal of Standard Transducer by NIST DS = Drift in Standard since last cal PS = Creep in Standard Transducer TS = Temperature effect on output of Standard RHF= Nonreproducibility of frame, load string CH = Calibration of HRBSC Instrument DH = Drift in HRBSC since last cal TH = Temperature effect on HRBSC Instrument LH = Nonlinearity of HRBSC Instrument NH = Noise of HRBSC Instrument 17

  18. CH Uncertainty in calibration of HRBSC (rectangular distribution) Source of Uncertainty Type Uncertainty (%RDG) CCX = Calibration of CX-0610 B 0.0008 DCX = Drift in transfer function of CX-0610 between calibrations B 0.0010 TCX = Temperature effect on CX-0610 B 0.0054 NCX = Noise of the HRBSC instrument during calibration with the CX-0610 B 0.0003   ------------ Combined (Root Sum of Squares) 0.0056 18

  19. Uncertainty Budget Example 19

  20. Dominant Uncertainty Components Nonreproducibility of load frame, threads, adaptors, alignment Calibration of Standard at low end of range Drift in Standard since last cal 20

  21. Load Cell Calibration System Software - Opening Screen INTERFACE

  22. INTERFACE DUT Description

  23. Setpoint Entry INTERFACE

  24. Setpoint File Selection INTERFACE

  25. Exercise Load Cells INTERFACE

  26. Begin Calibration INTERFACE

  27. Calibration INTERFACE

  28. Completed Calibration INTERFACE

  29. Error Plot INTERFACE

  30. Curve Fit INTERFACE

  31. Load Cell History INTERFACE

  32. INTERFACE INTERFACE

  33. Report Designer INTERFACE

  34. Custom Report INTERFACE

  35. Gold StandardTM E4 Machine Calibration System 9840-100-1 Intelligent Indicator One ICS-205 E4 Machine Calibration Software One CT-177-10 Gold Standardtm Interconnect Cable Assemby Serial Cable, Laptop to 9840 One CX-0440 +4mV/V Transfer Standard One SIS-104 System Setup Training at Interface INTERFACE

  36. Features of the Portable E4 Machine Calibration Software: Capable of providing the user with printed copies of: E4-02 Test Machine Verification Report. ISO 7500/1 Test Machine Verification Report. INTERFACE

  37. Portable E4 System Software – Opening Screen INTERFACE

  38. Setpoint Entry INTERFACE

  39. Setpoint File Selection INTERFACE

  40. Meter Configuration INTERFACE

  41. Machine Details INTERFACE

  42. Load Point Entry INTERFACE

  43. Load Point Entry INTERFACE

  44. Begin Verification INTERFACE

  45. Data Collection INTERFACE

  46. Completed Verification INTERFACE

  47. E4 Report INTERFACE

  48. Verification History INTERFACE

  49. ISO 7500-1 Report INTERFACE

  50. ISO 7500-1 INTERFACE

More Related