1 / 21

ECO - T 2x2 & 2x4

ECO - T 2x2 & 2x4. ECO - T 2x2 & 2x4.

terry
Download Presentation

ECO - T 2x2 & 2x4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECO - T 2x2 & 2x4 ECO - T 2x2 & 2x4 Designed as an energy efficient replacement to traditional fluorescent troffers in T-bar grid (NEMA Type G drop ceilings), the ECO-T LED Recessed Troffer is a cost-effective lighting solution for the commercial and institutional market, including schools and municipalities. Designed with the look of a traditional fluorescent fixture, the LED Recessed Troffer offers a classic recessed housing with LED strips that resemble fluorescent tubes, but operates with the energy saving benefits of LED technology. With dimming standard, the LED Recessed Troffer maintains 90 percent of the light in a 60-degree beam angle to project light downward towards surfaces. 2x4 2x2 • Kelvin Wattage Ver 022613

  2. ECO - T 2x2 & 2x4 Features & Benefits • 2X4 • Lumens: 3500K: 4569 • 4100K: 4498 • 5000K: 4903 • • 50,000 hour life at L70 standards • • 10.0 lbs. • 2X2 • Lumens: 3500K: 3297 • 4100K: 3421 • 5000K: 3768 • • 50,000 hour life at L70 standards • • 7.1 lbs. ECO-T 2x2 & 2x4 • Fluid dimming from 2 types of input signals • 0-10V Dimming • 5 year limited warranty • CRI: 85 • Fits standard T-bar grid (NEMA Type G drop ceilings) • Also available in 2’x2’ • Available prismatic diffuser • Room side access door for serviceability and re-lamping replaceable LED strips Approximately 136 BTU’s per hour over 4 sq ft area per panel Vs. Linear T5, T8 with over 320 BTU’s

  3. ECO - T 2x2 & 2x4 ECO-T OVERVIEW - PRODUCT VIDEO Click here or on the image above to launch the presentation.

  4. ECO - T 2x2 & 2x4 controls

  5. ECO - T 2x2 & 2x4 controls

  6. ECO - T 2x2 & 2x4 controls

  7. ECO - T 2x2 & 2x4 controls

  8. ECO - T 2x2 & 2x4 controls

  9. ECO - T 2x2 & 2x4 controls

  10. ECO - T 2x2 & 2x4 controls

  11. ECO - T 2x2 & 2x4 controls

  12. ECO - T 2x2 & 2x4 OPTIONS MLRTFKRecess Troffer Flange Mounting Kit PANEL-REMOTEWireless Remote Control Order code: 70590 Click here to download PDF MLFPRWPWireless remote wall mount Order code: 70691

  13. ECO - T 2x2 & 2x4 Specifications Download Download Download Download Download Download Download Download Download Download Download Download Download Download Download Download Download Download

  14. ECO-T Q&A ECO - T 2x2 & 2x4 Q - Will the ECO-T work on any 0-10 dimmer or does it need to be a Lutron model? Does the ECO-T dim all way down to 0% or just to 10-20%? A – Yes, it will work with any 0-10 ballast dimmer. With a Leviton dimmer, a single panel will dim all the way to off. Lutron requires the relay in their PP-20 to dim to off (without, it will dim to 10%) ---- Q - Can you use the Flat Panel MLFPIRK (Infrared Remote Control Kit) in conjunction with the ECO-T 2x2 and 2x4? A – Yes, our IR dimmer kit (MLFPIRK) and all our ECO-T panels will work together. However, a wall switch is necessary in order to turn the system off. ---- Q - Can I still daisy chain 20 ECO-T's together with 2-wire door bell wire (20-18 AWG)? A - Yes, use only the violet and grey wires to daisy chain. ---- Q - Explain the usage of the MLFPIRK on the new panels and ECO-T, How many can be daisy chained together? A – You can daisy chain up to 20 ECO-T panels. The Edge Lit Flat Panel will allow you to daisy chain 20 panels.

  15. ECO-T Q&A ECO - T 2x2 & 2x4 Q - When you refer to the IR control, you’re talking about the handheld device? A - I’m referring to the MLFPIRK option. This option includes the handheld controller, senor cable, and circuit board. Q - So if you use the IR control, they cannot turn off either unit? Do you still need a switch? A - The circuit design on our ECO-T does not include an internal cutoff to de-energize the panel. Because of this, full shut off needs to happen at the wall switch. (If using with MLFPIRK.) Q - So if you’re dimming more than one, the master ECO-T is the only panel that requires the MLFPIRK IR control? It will be able to dim all the others, up to 20 fixtures? A - Correct. Once you install the IR kit to the master, the satellite panels will dim. You will need to daisy chain the panels using 20/18GA control wire. ---- Q - What is "Simple Dimming"? A - Simple dimming is a term used to describe a 0-10v dimming system that does not require an additional power pack/relay to shut off the fixture completely. Because of this, only a 0-10v wall control dimmer is needed (no power pack.) This is achieved through a driver design that has 0-10v settings with a dimming range of 10%-100%. When a voltage below 10% is detected, the driver circuit shuts off the power completely. This avoids having a wall control component to perform the shut off function.

  16. ECO - T 2x2 & 2x4 Comparison- the numbers Note that most office and classroom environments require 30-35fc

  17. ECO - T 2x2 & 2x4 Picture is worth 1000 words Left- MLRT24D5541 Right- F32T8 2x4 (3Lamp)

  18. ECO - T 2x2 & 2x4 Eco-t roi Analysis Click to download the spreadsheet - Use it to simply customize for your job(s) and calculate the ROI quickly and easily .

  19. ECO - T 2x2 & 2x4 Eco-t roi Analysis ECO-T 2x2 Click to download the spreadsheet - Use it to simply customize for your job(s) and calculate the ROI quickly and easily .

  20. ECO - T 2x2 & 2x4 Packaging

  21. ECO - T 2x2 & 2x4 Certifying Bodies Yes - cETLus Yes - Rohs No - Energy Star Yes - DLC Yes - Lighting Facts

More Related