1 / 8

Rotary Airlock Valve Manufacturers in India

TRIMECH airlocks are the most popular choice for standard applications. TRIMECH airlocks are drop-thru, inboard bearing units. They can be applied to a high percentage of the applications customers have. These cast iron or Fabricated valves are built at our own factory.

trimech
Download Presentation

Rotary Airlock Valve Manufacturers in India

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. R O T A R Y A I R L O C K V A L V E S

  2. let's get started

  3. INTRODUCTION OF ROTARY AIRLOCK VALVES

  4. A rotary airlock valve can be equipped with a variety of rotor assembly tip designs. Each tip design addresses a particular problem or requirement of the application. Some are good for a wide range of applications, while others have limited applications. Knowing which tip to use is more of an art, than a science. Many times experience with a specific product material, or similar material, is the only guide. Sometimes, with all the variables to consider within a system, this experience may not be enough to accurately determine the proper tip design. It is, however, a good place to start. These description and illustrations are to help clarify various terms and applications, but can not completely cover the endless variety of configurations which are possible in the manufacture of rotor assemblies.

  5. Process The material is fed into rotor pockets(A gap between two vanes) from hopper or bin. Due to rotation of shaft vanes also rotates. Due to rotation of vanes the, material in the rotor pockets will be transferred from inlet of airlock valve to its outlet. From outlet, it will go to the pneumatic conveying system.

  6. USE Rotary Air-lock Valves are used at the bottom of Bins, Cyclones, Dust Collections or Feed Hoppers to discharge materials at a controlled rate or act as an Airlock.

  7. contact +91-79-25840557 4102/2, Phase No: 4, Nika Tube Cross Road, Near Hanuman Temple, G.I.D.C Vatva, Ahmedabad info@trimechindia.com www.trimechindia.com

  8. T H A N K S !

More Related