1 / 11

Project About Digital Stop Watch

Digital Logic & Design. Project About Digital Stop Watch. Presented To Ma’am Noor Ul Ain. Presented by 1. M. Asad ali M. Habib ajmal M. khurram shahzad. MCS-1. Components used in the the Project J-K Flip Flop Switch Power Alternator

tyra
Download Presentation

Project About Digital Stop Watch

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Digital Logic & Design Project About Digital Stop Watch

  2. Presented To Ma’am Noor UlAin Presented by 1. M. Asad ali M. Habibajmal M. khurram shahzad MCS-1

  3. Components used in the the Project • J-K Flip Flop • Switch • Power • Alternator • 7-Segment Display Coded Decimal (BCD) Display

  4. Flip Flop:The memory elements in a sequential circuit are called flip-flops. A flip-flop circuit has two outputs, one for the normal value and one for the complement value of the stored bit. Binary information can enter a flip-flop in a variety of ways and gives rise to different types of flip-flops. a flip-flop or latch is a circuit that has two stable states and can be used to store state information. A flip-flop is a bistablemultivibrator. The circuit can be made to change state by signals applied to one or more control inputs and will have one or two outputs. It is the basic storage element in sequential logic. Flip-flops and latches are a fundamental building block of digital electronics systems used in computers, communications, and many other types of systems.

  5. 1. JK Flip Flop: • JK flip Flop is the most widely used of all the flip-flop designs and is considered to be a universal flip-flop circuit. The sequential operation of the JK flip flop is exactly the same as for the previous SR flip-flop with the same “Set” and “Reset” inputs. The difference this time is that the “JK flip flop” has no invalid or forbidden input states of the SR Latch.

  6. The JK flip flop is basically a gated SR-FlipFlop with the addition of a clock input circuitry that prevents the illegal or invalid output condition that can occur when both inputs S and R are equal to logic level “1″. Due to this additional clocked input, a JK flip-flop has four possible input combinations, “logic 1″, “logic 0″, “no change” and “toggle”. The symbol for a JK flip flop is similar to that of an SR Bistable Latch. • Both the S and the R inputs of the SR bistable are replaced by two inputs called the J and K inputs, respectively.

  7. Table for Flip Flop:

  8. Truth Table for 3-Bits Input Present State Next State J-K Flip Flop I/P

  9. Implementation Static State

  10. Working State

  11. MR Habibi

More Related