1 / 20

RECALL LECTURE 16

RECALL LECTURE 16. The MOSFET has only one current, I D Operation of MOSFET NMOS and PMOS For NMOS, V GS > V TN V DS sat = V GS – V TN For PMOS V SG > |V TP | V SD sat = V SG + V TP. I D versus V DS (NMOS) or I D versus V SD (PMOS). NMOS V TN is POSITIVE

Download Presentation

RECALL LECTURE 16

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RECALL LECTURE 16 • The MOSFET has only one current, ID • Operation of MOSFET • NMOS and PMOS • For NMOS, • VGS > VTN • VDS sat = VGS – VTN • For PMOS • VSG > |VTP| • VSD sat = VSG + VTP

  2. ID versus VDS (NMOS) or ID versus VSD (PMOS)

  3. NMOS • VTN is POSITIVE • VGS > VTN to turn on • Triode/non-saturation region • Saturation region • VDSsat = VGS - VTN • PMOS • VTP is NEGATIVE • VSG > |VTP| to turn on • Triode/non-saturation region • Saturation region • VSDsat = VSG + VTP

  4. DC analysis of FET

  5. MOSFET DC Circuit Analysis - NMOS • The source terminal is at ground and common to both input and output portions of the circuit. • The CC acts as an open circuit to dc but it allows the signal voltage to the gate of the MOSFET. VG = VTH = R2 VDD R1 + R2 • In the DC equivalent circuit, the gate current into the transistor is zero, the voltage at the gate is given by a voltage divider principle: Use KVL at GS loop: VGS –VTH + 0 = 0 VGS = VTH

  6. MOSFET DC Circuit Analysis - NMOS • Assume the transistor is biased in the saturation region, the drain current: • Use KVL at DS loop • IDRD + VDS – VDD = 0 • If VDS > VDS(sat) = VGS – VTN, then the transistor is biased in the saturation region. • If VDS < VDS(sat), then the transistor is biased in the nonsaturation region.

  7. EXAMPLE: Calculate the drain current and drain to source voltage of a common source circuit with an n-channel enhancement mode MOSFET. Assume that R1 = 30 k, R2 = 20 k, RD = 20 k, VDD = 5V, VTN = 1V and Kn = 0.1 mA/V2 VTH = 20 5 = 2V hence VGS = VTH = 2V 30 + 20 VDSsat = VGS – VTN = 2 – 1 = 1V, so, VDS > VDSsat, our assumption that the transistor is in saturation region is corrent

  8. EXAMPLE VDD = 10V • The transistor has parameters VTN = 2V and Kn = 0.25mA/V2. • Find ID and VDS RD = 10k R1 = 280k R2 = 160k

  9. Solution 2. Assume in saturation mode: ID = Kn(VGS - VTN)2 So, ID = 0.669 mA 3. KVL at DS loop: VDS = VDD – IDRD = 10 – 0.669 (10) = 3.31 V 4. VDS sat = VGS – VTN = 3.636 – 2 = 1.636 V So, VDS > VDSsat , therefore, assumption is correct! 1. VTH = 160 10 = 3.636 V 160 + 280 KVL at GS loop: VGS – VTH + 0 = 0  VGS = VTH Answer: ID = 0.669 mA and VDS = 3.31 V

  10. MOSFET DC Circuit Analysis - PMOS Different notation: VSG and VSD Threshold Voltage = VTP VG = VTH = R2 VDD R1 + R2 Use KVL at GS loop: VSG + 0 + VTH – VDD = 0 VSG = VDD - VTH

  11. MOSFET DC Circuit Analysis - PMOS • Assume the transistor is biased in the saturation region, the drain current: • Calculate VSD: • Use KVL at DS loop: • VSD + IDRD - VDD = 0 ID = Kp (VSG + VTP)2 VSD = VDD - IDRD • If VSD >VSD(sat) = VSG + VTP, then the transistor is biased in the saturation region. • If VSD < VSD(sat), then the transistor is biased in the non-saturation region.

  12. Calculate the drain current and source to drain voltage of a common source circuit with an p-channel enhancement mode MOSFET. Also find the power dissipation. Assume that, VTP = -1.1V and Kp = 0.3 mA/V2 5V Use KVL at GS loop: VSG + 0 +2.5 – 5 = 0 VSG = 5 – 2.5 = 2.5 V Assume biased in saturation mode: Hence, ID = 0.3 ( 2.5 – 1.1)2 = 0.5888mA Calculate VDS Use KVL at DS loop: VSD + IDRD – 5 = 0 VSD = 5 - IDRD VSD = 5 – 0.5888 ( 7.5) = 0.584 V 50 k VSG > |VTP | 50 k 7.5 k

  13. VSD sat = VSG + VTP = 2.5 – 1.1 = 1.4V Hence, VSD < VSD sat. Therefore assumption is incorrect. The transistor is in non-saturation mode! ID = 0.3 2 ( 2.5 – 1.1) (5 – IDRD) – (5 – IDRD)2 ID= 0.3 2.8 (5 – 7.5ID) – (5-7.5ID)2 ID = 0.3 14 – 21ID– (25 – 75ID + 56.25ID2) ID = 0.3 14 – 21ID -25 +75ID – 56.25ID2 56.25 ID2 – 50.67 ID + 11 = 0 ID = 0.536 mA ID = 0.365 mA

  14. ID = 0.536 mA ID = 0.365 mA VSD = 5 – IDRD = 0.98 V VSD = 5 – IDRD = 2.26 V VSD sat = VSG + VTP = 2.5 – 1.1 = 1.4V 0.98V < 1.4V Smaller than VSD sat : OK! 2.26V > 1.4V Bigger than VSD sat : not OK Answer: ID = 0.536 mA and VSD = 0.98V Power dissipation = ID x VSD = 0.525 mW

  15. LOAD LINE RD RD Common source configuration i.e source is grounded. It is the linear equation of ID versus VDS Use KVL VDS = VDD – IDRD ID = -VDS + VDD

  16. ID (mA) y-intercept Q-POINTS ID VGS VDS (V) x-intercept VDS

  17. For the NMOS transistor in the circuit below, the parameters are VTN = 1V and Kn= 0.5 mA/V2. • DC Analysis where source is NOT GROUNDED

  18. What is the value of VG ? b) Write down the branch current equation for the source terminal. c) Get an expression for VGS in terms of ID VG = -1V ID VS – (-5) = ID VS + 5 = ID 1 ID use KVL: 0 + VGS+ 1(ID) -5 +1 = 0 VGS = 4 - ID Or use node voltages: VGS = VG - VS VGS = -1 – ( ID – 5) VGS = 4 - ID

  19. d) The transistor is biased in saturation mode, calculate ID. You will know which value of ID that you need to choose by calculating VGS. Justify your answer. ID ID

  20. e) Write down the branch current equation for the drain terminal f) Calculate VDS and confirm that the transistor is biased in saturation mode. ID 5 - VD = ID VD = 5 - 2ID 2 ID Use KVL: Or use node voltages: VDS = VD - VS IDRD + VDS + IDRS – 5 – 5 = 0 1.354 (2) + VDS + 1.354 – 10 = 0 VDS = 10 – 1.354 – 2.708 = 5.938 V where VD = 5 - 2( 1.354) = 2.292 V And VS = ID - 5 = - 3. 646 V So, VDS = 2.292 – (-3.646) = 5.938 V VDS sat = VGS – VTN = 2.646 – 1 = 1.646 V VDS > VDS sat  CONFIRMED

More Related