1 / 39

Engine tuning and Performance

Engine tuning and Performance. Niels Kjemtrup LDF. Agenda. New engine program SFOC Optimization methods. New engine programme available . S90ME-C9.2: -1 g/kWh (166 g/kWh) S80ME-C9.2: -2 g/kWh (166 g/kWh) G80ME-C9.2: -1 g/kWh (166 g/kWh) G70ME-C9.2: -1 g/kWh (167 g/kWh)

wenda
Download Presentation

Engine tuning and Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engine tuningand Performance • Niels Kjemtrup LDF

  2. Agenda • New engine program • SFOC • Optimization methods

  3. New engine programme available S90ME-C9.2: -1 g/kWh (166 g/kWh) S80ME-C9.2: -2 g/kWh (166 g/kWh) G80ME-C9.2: -1 g/kWh (166 g/kWh) G70ME-C9.2: -1 g/kWh (167 g/kWh) G60ME-C9.2: -1 g/kWh (167 g/kWh) G50ME-B9.3: -1 g/kWh (167 g/kWh)

  4. New engine programme Tuning methods • .

  5. SFOC tolerance options

  6. Engine types MC-C with VIT can always make the same performance as a MC-C without VIT ME-BX.2 can always make the same performance as a MC-C with VIT ME-BX.3 can always make the same performance as a ME-BX.2 …….. …. .. Also for part load tunings

  7. GI Engines speed range

  8. SFOC part-load curves

  9. SFOC part-load curves

  10. SFOC OptimisationMethods – IMO Tier llEngines • 1. SFOC optimised load ranges • High Load: 85% - 100% SMCR (standard tuned engine) • Part Load: 50% - 85% SMCR • Low Load: 25% - 70% SMCR • 2. Engine tuning methods available for part load and low load optimisations • EGB: Exhaust Gas Bypass • VT: Variable Turbine Area • ECT: Engine Control Tuning (only for ME/ME-C) • Only available for engines with high-efficient turbochargers • 3. Examples are shown for the below engine type • 6S90ME-C9.2

  11. SFOC OptimisationMethods – IMO Tier llEngines • The IMO NOx value is given as a weighted average of the NOx emission at 25, 50, 75 and 100% load: • IMO Cycle = 5%*NOx(25) + 11%*NOx(50) + 55%*NOx(75) + 29%*NOx(100) • NOx emission at low load count little in the cycle value • This relationship can be utilised to tilt the SFOC profile over the load range • SFOC can be reduced at low load at the expense of a higher SFOC in the high load range without increasing the IMO NOx limit

  12. SFOC OptimisationMethods – IMO Tier llEnginesEGB 6S90ME-C9.2 L1

  13. SFOC OptimisationMethods – IMO Tier llEnginesVT 6S90ME-C9.2 L1

  14. SFOC OptimisationMethods – IMO Tier llEnginesECT 6S90ME-C9.2 L1

  15. SFOC OptimisationMethods – IMO Tier llEnginesGI

  16. MC-C with VIT can always make the same performance as a MC-C without VIT ME-BX.2 can always make the same performance as a MC-C with VIT ME-BX.3 can always make the same performance as a ME-BX.2 …….. …. .. Also for part load tunings

  17. Engine configuration and tuning medtods • Engine Configurations: • MC-C without VIT: HL /PL-EGB/LL-EGB/PL-VT/L-VT • MC-C with VIT: HL /PL-EGB/LL-EGB/PL-VT/L-VT • ME-BX.2: HL /PL-EGB/LL-EGB/PL-VT/L-VT • ME-BX.3: HL /PL-EGB/LL-EGB/PL-VT/L-VT/PL-ECT/LL-ECT • ME-C: HL /PL-EGB/LL-EGB/PL-VT/L-VT/PL-ECT/LL-ECT • ME-C-GI in HFO: HL /PL-EGB/LL-EGB/PL-VT/L-VT/PL-ECT/LL-ECT • 36 configuration for each engine type

  18. Part Load Methods cannot be combined • T/C cut out cannot be combined with part load methods • GI tuning cannot be combined with part an low load methods

  19. Temperatures

  20. Temperatures

  21. Temperatures

  22. Temperatures

  23. Temperatures

  24. Temperatures • Part Load EGB

  25. MC-C with VIT can always make the same performance as a MC-C without VIT ME-BX.2 can always make the same performance as a MC-C with VIT ME-BX.3 can always make the same performance as a ME-BX.2 …….. …. .. Also for part load tunings

  26. EGB tuning • EGB Control • EGB open gives same P-scav as HL tuned • EGB open gives approx. 40 dg. C higher temp than EGB closed • EGB open gives approx. 5% gas amounts than EGB closed • Part and low: EGB open results in approx 6 g/kWh higher SFOC than EGB closed • MCR and High low: EGB open increases SFOC 1-6 g/kWh • depending on P-Max margin when closing EGB

  27. Temperatures • MC-C without VIT in combination with EGB: • Closed EGB  High P-scav  High P-comp  High P-max  • Very High NOx  Low SFOC • (I. e. Bypass must be open at 100% and 75% load due to NOx) • MC-C with VIT in combination with EGB: • Closed EGB  High P-scav  High P-comp  Equal or Higher P-max  • High NOx  Low SFOC • (I. e. Bypass must be open at 100% and 75% load due to NOx)

  28. EGB tuning • ME-BX.2in combination with EGB: • Closed EGB  High P-scav  High P-comp  Equal or Higher P-max  • Very High NOx  Low SFOC • (I. e. Bypass must be open at 100% and 75% load due to Nox) • ME-BX.3 in combination with EGB: • Closed EGB  High P-scav  Equal or High P-comp  Equal or Higher P-max  • High Pscav in combination with equal P-Comp and equal P-max  • Lower NOx and equal or slightly increased SFOC • High Pscav in combination with High P-Comp and High P-max  • Very High NOx and Low SFOC • (I. e. Bypass must be open at 100% due to T/C speed • closed at 75% with equal P-Comp and equal P-max • closed at lower than with high P-Comp and high P-max

  29. EGB tuning • ME-C in combinationwith EGB: • Closed EGB  High P-scav  Equal or High P-comp  Equal or Higher P-max  • High Pscav in combination with equal P-Comp and equal P-max  • Lower NOx and Equal or slightly increased SFOC • High Pscav in combination with High P-Comp and High P-max  • Very High NOx and Low SFOC • (I. e. Bypass must be open at 100% due to T/C speed • closed at 75% with equal P-Comp and equal P-max • closed at lower than with high P-Comp and high P-max

  30. Temperatures

  31. Temperatures

  32. Temperatures

  33. Temperatures

  34. Temperatures

  35. Temperatures

  36. Temperatures

  37. Temperatures

  38. Temperatures

  39. SteamProduction Possiblesteamproduction (SP) SP (kg/h) = Engine Power/350 x (Texh-185) Example: Power =10000 kW Exhausttemp = 220 dg. C SP (kg/h) = 10000/350 *(220-185) = 1000 kg/h

More Related