1 / 47

DEM Preparation Using the New England Method

DEM Preparation Using the New England Method. Streamstats Data Preparation Workshop Pete Steeves and Alan Rea MA-RI and ID Districts USGS. NHD Watershed.

whaller
Download Presentation

DEM Preparation Using the New England Method

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DEM Preparation Using the New England Method Streamstats Data Preparation Workshop Pete Steeves and Alan Rea MA-RI and ID Districts USGS

  2. NHD Watershed • DEM preparation using the New England method was also used to create a watershed tool for NHD. For areas that were prepared for NHD Watershed, the resulting datasets can be used in StreamStats. Several overlapping objectives include: • Delineate a watershed from any point location on NHD reaches quickly, reliably, and accurately • Relate the resulting watershed to the reach and measure of the selected point (in essence, create a “polygon event”) • Horizontally integrate 3 earth-surface-based physiographic datasets (hydrography, basin boundaries, and elevation data) through a series of pre-processing steps StreamStats Data Prep Workshop Oct 21-22, 2003

  3. Overview • Projections • Tiling scheme (database design) • Developing datasets in neighboring states • Preparing NHD and WBD • Preparing DEM data • Topogrid • Walling and Burning StreamStats Data Prep Workshop Oct 21-22, 2003

  4. Projections • The Streamstats team has decided to go with a multi-projection environment. • Every state will decide it’s own projection(s) • This requires some upfront GIS planning for a given state: • Basemaps • DEM preparation • Basin characteristics StreamStats Data Prep Workshop Oct 21-22, 2003

  5. Tiling Scheme • Streamstats has adopted the 8-digit Hydrologic Unit as it’s tiling scheme • This tiling scheme is also being used for NHD, WBD, and EDNA • The ‘single outlet’ standard for hydrologic unit tiles is ideal for the ArcHydro/Streamstats environment StreamStats Data Prep Workshop Oct 21-22, 2003

  6. StreamStats Data Prep Workshop Oct 21-22, 2003

  7. Developing Datasets in Neighboring States • Define your study area • Study areas are 2 tiered • Tier 1 includes full or partial 8-digit Hydrologic Units (HUCs) where a complete set of archydro datasets need to be produced • Tier 2 includes full HUCs upstream of your state and not overlapping your state StreamStats Data Prep Workshop Oct 21-22, 2003

  8. Tier 1 Consideration for Massachusetts StreamStats Data Prep Workshop Oct 21-22, 2003

  9. Tier 2 Consideration for Massachusetts StreamStats Data Prep Workshop Oct 21-22, 2003

  10. Developing Datasets in Neighboring States • Tier 1 data needs to be developed in your State projection • Tier 2 data can be developed in any projection. The final vector Global datasets can be projected without complications StreamStats Data Prep Workshop Oct 21-22, 2003

  11. StreamStats Data Prep Workshop Oct 21-22, 2003

  12. StreamStats Data Prep Workshop Oct 21-22, 2003

  13. StreamStats Data Prep Workshop Oct 21-22, 2003

  14. StreamStats Data Prep Workshop Oct 21-22, 2003

  15. StreamStats Data Prep Workshop Oct 21-22, 2003

  16. Preparation of NHD • NHD acts as the backbone, upon which the other datasets are structured • Keep in mind that the optimal goal is to have a dendrite network • Only the centerline route features are used when preparing the NHD StreamStats Data Prep Workshop Oct 21-22, 2003

  17. Preparation of NHD (cont) • Determine if you have hi-resolution NHD for a given HUC • Copy the NHD coverage out of the NHD workspace • Convert the route.rch table to an Arc coverage • Project the NHD coverage to your state projection StreamStats Data Prep Workshop Oct 21-22, 2003

  18. Preparation of NHD (cont) • Remove all isolated networks that are not part of the main network • Flip all remaining arcs. NHD route features are oriented upstream by default, and they need to be oriented downstream for this procedure • Extend the outlet arc StreamStats Data Prep Workshop Oct 21-22, 2003

  19. StreamStats Data Prep Workshop Oct 21-22, 2003

  20. StreamStats Data Prep Workshop Oct 21-22, 2003

  21. Preparation of NHD (cont) • A final step involves making a dendrite of the NHD • A consequence of skipping this step may be incorrect watershed delineations for points on the braided section of a network • Canals and other man made structures must be dealt with on a case by case basis StreamStats Data Prep Workshop Oct 21-22, 2003

  22. StreamStats Data Prep Workshop Oct 21-22, 2003

  23. StreamStats Data Prep Workshop Oct 21-22, 2003

  24. Preparation of WBD • WBD boundaries act as retainer walls for DEM preparation. • By including WBD in the preprocessing, watershed delineations are forced to recognize these boundaries as truth StreamStats Data Prep Workshop Oct 21-22, 2003

  25. Preparation of WBD (cont) • Boundaries may need to be modified to make certain that they cross NHD in a single location for a given basin polygon. • Boundaries can be added to WBD (i.e. basin boundaries delineated to gage station locations). StreamStats Data Prep Workshop Oct 21-22, 2003

  26. StreamStats Data Prep Workshop Oct 21-22, 2003

  27. StreamStats Data Prep Workshop Oct 21-22, 2003

  28. StreamStats Data Prep Workshop Oct 21-22, 2003

  29. StreamStats Data Prep Workshop Oct 21-22, 2003

  30. StreamStats Data Prep Workshop Oct 21-22, 2003

  31. StreamStats Data Prep Workshop Oct 21-22, 2003

  32. Preparation of WBD (cont) • For dense basin boundary datasets weed out any boundaries that do not work well with NHD, particularly in areas with man-modified structures (i.e. canals) • This work needs to be done in coordination with NHD preparation. At times it may be more appropriate to weed out NHD features (i.e. canals) StreamStats Data Prep Workshop Oct 21-22, 2003

  33. StreamStats Data Prep Workshop Oct 21-22, 2003

  34. StreamStats Data Prep Workshop Oct 21-22, 2003

  35. StreamStats Data Prep Workshop Oct 21-22, 2003

  36. StreamStats Data Prep Workshop Oct 21-22, 2003

  37. StreamStats Data Prep Workshop Oct 21-22, 2003

  38. Preparation of NED • Topogrid is a computation intensive step that enforces NED to recognize NHD as drainage truth. • Subsequent walling and burning steps further enforce the Topogrid process by exaggerating elevation values along NHD and WBD features StreamStats Data Prep Workshop Oct 21-22, 2003

  39. Preparation of NED (cont) • Several preliminary steps include: • Projecting • Clipping the NED to a 4000 meter buffer area around the basin • Converting zunits to centimeters • If your HUC has partial areas with 10 meter DEMs (and you want to use them), this data needs to be developed separately from the NED for these preliminary steps • Converting DEM values to points StreamStats Data Prep Workshop Oct 21-22, 2003

  40. Topogrid The Topogrid command is an interpolation method specifically designed for the creation of hydrologically correct digital elevation models (DEMs) from comparatively small, but well selected elevation and stream coverages. It is based upon the ANUDEM program developed by Michael Hutchinson (1988, 1989). StreamStats Data Prep Workshop Oct 21-22, 2003

  41. Topogrid Represents the ‘Intermediate Step’ StreamStats Data Prep Workshop Oct 21-22, 2003

  42. Topogrid • Resample cell size to 10 meters • Set your origin coordinates using the subcommand ‘XYZlimits’ • Buffer your HUC boundary 50 meters and use for subcommand ‘Boundary’ • Input layers include dendrite steams and NED points • Save the resulting dataset after post Topogrid processing StreamStats Data Prep Workshop Oct 21-22, 2003

  43. Topogrid • For most HUCs, breaking up your watershed may be necessary prior to running TopoGrid • The key factor is GridAllocation • Be sure to buffer each subset 4000 meters (hence, overlap) for input NED points • Be sure to buffer each subset 50 meters (hence overlap) for the subcommand ‘Boundary’ • Use the full dendrite layer for each subset StreamStats Data Prep Workshop Oct 21-22, 2003

  44. StreamStats Data Prep Workshop Oct 21-22, 2003

  45. Walling and Burning • Exaggerate the depth of the dendrite and height of the WBD boundaries • Simply run the nedprocessing.aml (which runs the agree.aml as well) • Agree.aml is used for burning: http://www.crwr.utexas.edu/gis/gishyd98/quality/agree/agree.htm#Part1 StreamStats Data Prep Workshop Oct 21-22, 2003

  46. StreamStats Data Prep Workshop Oct 21-22, 2003

  47. StreamStats Data Prep Workshop Oct 21-22, 2003

More Related