International Roaming for GSM

1. International Roaming for GSM Kwangwoon Univ. Network Computing lab 2003. 04. 15 김형민 (meruru98@nate.com)

2. Introduction • GSM supports roaming services that allow a subscriber in a GSM network to receive mobile telephony service when the user visits a different GSM network • GSM networks are within the same country • GSM networks are located in different countries

3. Introduction • International roaming issue from the customer’s perspective • John is a subscriber of GSM service in Korea • Suppose that he travels from Korea to Japan ,which have a GSM roaming agreement John Jenny

4. Three scenarios for call delivery to John • Scenarios #1 • If a person in Korea call John • The caller is charged for a local GSM call • John is charged for an international call from Korea to Japan • Scenarios #2 • If the caller is from a third country (say, Hong Kong) • The caller is charged for an international call from Hong Kong to Korea • John is charged for an international call from Korea to Japan • Scenarios #3 • If the caller is in Japan • international call • This scenario is in fact a special case of scenario 2, and is referred to as tromboning

5. International GSM Call Setup • The call delivery procedure to a GSM roamer is basically the same as the procedure described in Chapter 9, except that two international switch centers (ISCs) are involved in the voice path. • ISCs offer interworking functions between the national networks and the international network • The call path of every international call is composed of three segments: • one in origination country • another in the international network • the third in the destination country • These circuit segments are interconnected by two ISCs: • one in the origination country • the other in the destination country

6. International call setup procedure (Step 1) JAPAN Korea ISC C (Korea) 1.2 ISC B (Japan) 1.3 GMSC D 1.1 Switch A ISC C interprets the prefix of the remaining digits, and sets up the voice trunk to GMSC D Jenny first dials the ISCA (international switch center access code), CC (country code), John’s MSISDN Switch A interprets the ISCA, the first portion of the dialed digits, it identifies the call as an international call, then sets up the call using the IAM message to Japan ISC Based on country code, ISC B routes the call to Korea’s ISC C VLR F HLR E MSC G 1 John Jenny

7. International call setup procedure (Step 2 ~ 6) JAPAN Korea ISC C (Korea) 1.2 ISC B (Japan) 1.3 GMSC D 3.2 4.2 6.1 6.2 1.1 3.3 2 4.1 Switch A 5 3.1 6.3 4.3 VLR F HLR E MSC G 1 Step 2. GMSC D queries HLR E to obtain the MSRN Step 3and 4 HLR E queries VLR F Step 5 The MSRN is returned to GMSC D Step 6 Based on the MSRN, GMSC D uses the IAM message to set up the trunk to MSC G 6.3 John 6.3 Jenny

8. Reducing the International Call Delivery Cost • To avoid unnecessary international trunk setups, an IAM message should not travel across country boundaries before the destination is known • Four solutions that follow this guideline • A basic restriction is that we should not introduce any new message types to the GSM MAP protocol defined in GSM specification 09.02. • The solutions utilize only existing messages with the prefix MAP_ • In the first three solutions, we utilize the concept of roamer location cache (RLC) • In solution 4, we introduce a special dialing code that leads the call to the GMSC of the visited GSM system

9. RLC • The RLC in a visited system maintains a database containing the records of all international roamers who are presently in that visited system • From the perspective of a VLR in the visited system, RLC functions as the HLR of a roamer • From the perspective of the HLR in the home system of the roamer, RLC serves as the VLR in a visited system

10. Solution 1 (Registration) JAPAN Korea ISC C (Korea) 3 ISC B (Japan) 4 5 RLC Step 4. At the same time, ISC B duplicates the message and forwards it to the RLC. RLC creates a record to store the IMSI and VLR/MSC address Step 5. RLC는 MAP_RESTORE_DATA : HLR에게 MSISDN 요구MAP_INSERT_SUBSCRIBER_DATA : MSISDN을 돌려받는다 Step 1. The MS registers to the VLR Step 2. The VLR sends MAP_UPDATE_LOCATION to the roamer’s HLR. HLR은 외국에 있으므로 ISC B에게 라우트 Step 3. ISC B는 메시지를 해석, roamer 등록절차인지를 식별, The message is forwarded to Korean (ISC C) as usual 3 5 2 HLR VLR MSC 1 1 1

11. Solution 1 (Call delivery) ISC B (Japan) PSTN Switch A 1 2 Step 3. RLC Table에 John entry가 있는 경우 VLR로 부터 MSRN을 가지고 온다. Step 4. By using the MSRN, ISC B routes the IAM message to John Step 2. CC code와 남아있는 번호에 근거하여 ISC B는 국내에서 이뤄지는 통화임을 알게 된다 ISC B는 IAM 메시지에 의해 제공된 MSISDN을 이용하여 RLC를 찾는다 Step 1. Jenny first dials the ISCA code, the CC code, then John's MSISDN 스위치A는 다이얼의 앞 부분(ISCA+CC)을 해석 국제전화임을 확인하고 ISC B에게 라우트 (IAM message) RLC 1 4 Jenny 3 VLR 4 MSC John

12. Solution 1 (Advantage & Disadvantage) • Advantage • Only ISC B needs to be modified • Other network elements, such as the VLR and HLR, remain the same • Disadvantage • Most ISCs are not equipped with the GSM MAP protocol (not be able to interpret the GSM MAP message) • ISCs typically belong to an international telephone carrier different from that of the GSM service provider

13. Solution 2 (Registration) Korea JAPAN ISC C (Korea) 3 ISC B (Japan) 3 4 RLC 4 3 4 Switch D 2 HLR VLR Step 2. VLR은 international roamer의 등록임을 알고, MAP_UPDATE_LOCATION 메시지를 RLC에게 보낸다 RLC creates a record to store the IMSI and VLR/MSC address Step 1. The MS registers to the VLR Step 3. RLC sends the MAP_UPDATE_LOCATION message to the roamer’s HLR Step 4. 등록과정이 끝난 후, RLC는 MAP_RESTORE_DATA 메시지를 이용해 roamer의 MSISDN을 얻는다 MSC A 1 1 1

14. Solution 2 (Call delivery) PSTN Switch A Switch D 1 2 Step 2. Switch D는 IAM 메시지에 의해 제공된 MSISDN을 이용하여 RLC를 찾는다 Step 3. RLC Table에 John entry가 있는 경우 VLR로 부터 MSRN을 가지고 온다. Step 4. By using the MSRN, ISC B routes the IAM message to John Step 1. The steps are the same as those for solution 1. Except that Jenny dials the number of Switch D instead of the country code RLC 1 4 Jenny 3 VLR 4 MSC John

15. Solution 2 (Advantage & Disadvantage) • Advantage • The modifications are made only within the GSM network • Disadvantage • Extra modifications to the VLR • The caller must dial the number of Switch D, then the MSISDN • Dialing process id different from the ordinary international call dialing procedure • Sophisticated billing procedure

16. Solution 3 (Registration) Korea JAPAN ISC C (Korea) 2 ISC B (Japan) RLC 4 4 Switch D 2 3 2 4 extrator HLR VLR Step 2. The VLR sends MAP_UPDATE_LOCATION to the roamer’s HLR. HLR은 외국에 있으므로 ISC B에게 라우트 Step 3. foreign country의 HLR에게 location update 메시지가 보내질 때 동작 RLC creates a record to store the IMSI and VLR/MSC address Step 4. 등록과정이 끝난 후, RLC는 MAP_RESTORE_DATA 메시지를 이용해 roamer의 MSISDN을 얻는다 Step 1. The MS registers to the VLR MSC A 1 1 1

17. Solution 3 (Advantage & Disadvantage) • Advantage • It is transparent to the VLR • Disadvantage • A new network component (i.e., the extractor)

18. Solution 4 • Dial NDC1+IRAC+CC+NDC2+SN • NDC1 : NDC or mobile network access code to the visited GSM system • IRAC : international roamer access code • CC : country code of the home country • NDC2 : NDC of the home GSM system • SN : subscriber number for the roamer • PSTN routes the call to a GMSC of the visited GSM system (NDC1) • GMSC는 international roaming call임을 확인 (IRAC) • HLR에게 질의하는 대신 CC+NDC2+SN을 통하여 MSISDN얻어냄 • Signaling path between the GMSC and the HLR already exists • The GMSC query the HLR to obtain the MSRN • GMSC는 MSC에게 call을 라우트, 목적한 MS에게 도착한다

19. PSTN 5 4 HLR VLR 1 GMSC 2 3 6 MSC

20. Solution 4 • GMSC is a general-purpose switching system • roamer의 HLR을 억세스하기 위한 경로해석을 수행 • 목적지 MSC에게 직접적으로 콜을 라우트 • Advantage • GSM call delivery procedure is not modified • No new elements are required • Cost-effective (no new network elements)