1 / 9

UPDATE IN PTC-ORBIT PSB STUDIES Space charge meeting (27-04-2012) *

UPDATE IN PTC-ORBIT PSB STUDIES Space charge meeting (27-04-2012) *. Vincenzo Forte. * Follows LIS meeting presentation 16/04/2012. Logical path*. Externally created ( MadX , …) Internally modified (tables). Lattice setup. Externally created ( Mathematica , …).

wynona
Download Presentation

UPDATE IN PTC-ORBIT PSB STUDIES Space charge meeting (27-04-2012) *

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UPDATE IN PTC-ORBIT PSB STUDIES Space charge meeting (27-04-2012) * Vincenzo Forte *Follows LIS meeting presentation 16/04/2012

  2. Logical path* Externally created (MadX, …) Internally modified (tables) Lattice setup Externally created (Mathematica, …) Inject starting 6-D matched distribution PTC ORBIT basic settings *From LIS meeting presentation 16/04/2012 Adding of space charge Orbit routines PTC-ORBIT 1000 turns tracking RMS emittance 95-99% emittance tunes Results analysis Plots and tunes footprints Best settings choose Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  3. Results – first without space charge…* *From LIS meeting presentation 16/04/2012 Why this transitory without space charge??? y Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  4. D.O.E.* Latticesetup Inject starting 6-D matched distribution PTC ORBIT basic settings *From LIS meeting presentation 16/04/2012 The initial distributions, as usual, were matched to this initial parameters from PTC Twiss table output * Beta functions statistical precision increases with number of m.p. Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  5. Preliminary considerations • In the PSB study the introduction of time-dependent elements is useful to control some lattice’s elements during the simulations. • This is obtained in PTC-Orbit through tables, that let us vary the waveform of magnets strengths and RF cavities to desired functions (like ramps or even non-linear) through linear interpolations in time. • In the PSB the (LHC) beam will be injected horizontally into each PSB ring with a chicane using four dipole magnets (BS), and a painting bump using four kicker magnets (KSW). Then, we have also a double harmonic RF system that can be managed through tables (i.e. for acceleration). • Regarding to our preliminary lattice (bumps at 0, kickers at 0, double harmonic without acceleration), we initially took a complete lattice (with bumps, kickers at non-0 value) and then applied tables to overwrite (at 0 value) the BS and KSW strengths and to define the RF cavity. Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  6. The initial distributions, as usual, were matched to this initial parameters from PTC Twiss table output *From LIS meeting presentation 16/04/2012 fractional tunes 0.277351800735185 0.431269833678875 name s betaxbetayalphaxalphayeta_xetap_xPSBRING$START 0.0000 5.5940 3.6225 0.87260E-05 -0.22351E-03 -2.5655 0.25532E-03 These dispersions values must be multiplied for brel ~ 0.52 Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  7. And so… what generated the inital oscillations if the Twiss are matched? • We made an attempt… what if it was just a mismatching? y After 1000 turns, but even much before, the distribution seems to be matched At the beginning there seems to be a mismatching in vertical transverse plane Attempt: We took the distribution at turn 1000 and made a new run for 50 turns with this one as initial distribution Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  8. And so… what generated the inital oscillations if the Twiss are matched? Now it’s vertically matched … but w.r.t. which Twiss parameters ??? So… why are the values different from the PTC Twiss table ones?? Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

  9. InitPTC("PSB_PTC_ORBIT_FLAT_427_443.TXT"); ReadPTCscript("fringe.ptc"); ReadPTCscript("chrom.ptc"); /////////////////////////////////////////////////////////// // (2) PTC scripts for tracking WITH time-dependent elements /////////////////////////////////////////////////////////// ReadPTCscript("PSB_PTC_TOTAL_RAMP_RFTable.ptc"); ReadPTCscript("twiss_script.ptc"); …. Tracking routines ReadPTCscript("twiss_script.ptc"); Diagnostic routines • It depends on the position where you put the ReadPTCscript("twiss_script.ptc") command: • If you put before tracking routines you are still considering the complete lattice with bumps and kickers (at non-zero value) • If you put after (or during) tracking loops, the tables will be effectively applied and the lattice will change (bumps and kickers at 0). W. Point tunes will be consequently modified too after applying tables fractional tunes 0.276163580722948 0.416531295482894 name s betaxbetayalphaxalphayeta_xetap_x PSBRING$START 0.0000 5.6285 3.2533 -0.23633E-14 0.31041E-14 -2.5877 0.16376E-14 Preliminary results of the PTC/ORBIT convergence studies in the PSB - Vincenzo Forte

More Related