1 / 112

CHAPTER 10

CHAPTER 10. Dimensioning and Tolerancing. Learning Objectives. Identify and use common dimensioning systems Explain and apply dimensioning standards based on ASME Y14.5 -2009 Apply proper specific notes for manufacturing features Place proper general notes and flag notes on a drawing

xavier-dunn
Download Presentation

CHAPTER 10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHAPTER 10 Dimensioning and Tolerancing

  2. Learning Objectives • Identify and use common dimensioning systems • Explain and apply dimensioning standards based on ASME Y14.5-2009 • Apply proper specific notes for manufacturing features • Place proper general notes and flag notes on a drawing • Interpret and use correct tolerancing techniques

  3. Learning Objectives • Prepare completely dimensioned multiview drawings from engineering sketches and industrial drawings • Apply draft angles as needed to a drawing • Dimension CAD/CAM machine tool drawings • Prepare casting and forging drawings

  4. Learning Objectives • Provide surface finish symbols on drawings • Solve tolerance problems including limits and fits • Use an engineering problem as the basis for your layout techniques • Describe the purpose of ISO 9000 Quality Systems Standard and related standards

  5. Dimensions • Required on detail drawings • Provide shape and size description • Size dimensions • Location dimensions • Notes • Local notes (specific notes) • General notes

  6. Dimensions

  7. ASME Dimensioning Standards • ASME Y14.5, Dimensioning and Tolerancing • General note: DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009 • Several other ASME documents with standards related to dimensioning and tolerancing

  8. Dimensioning Definitions • Actual size • Allowance • Basic dimension • Bilateral tolerance • Datum • Diameter • Feature • Feature of size • Geometric tolerance • Least material condition (LMC) • Limits of dimension

  9. Dimensioning Definitions • Maximum material condition (MMC) • Nominal size • Radius • Reference dimension • Stock size • Specified dimension • Tolerance • Unilateral tolerance

  10. Fundamental ASME Y14.5 Dimensioning Rules • Each dimension has a tolerance except reference, maximum, minimum, or stock • Dimensioning and tolerancing must be complete • Show each necessary dimension of an end product • Select and arrange dimensions to suit the function and mating relationship of a part

  11. Fundamental ASME Y14.5 Dimensioning Rules • Dimensions must not be subject to more than one interpretation • Do not specify the manufacturing processes unless necessary • Identify nonmandatory dimensions with an appropriate note • Arrange dimensions to provide required information and optimum readability • Show dimensions in true profile views and visible outlines

  12. Fundamental ASME Y14.5 Dimensioning Rules • Dimension diameter or thickness of materials manufactured to gage or code numbers • 90°angle is implied for centerlines and lines • 90°basic angle is implied for centerlines located by basic dimensions • A zero basic dimension applies where axes, center planes, or surfaces are shown one over the other with established geometric controls

  13. Fundamental ASME Y14.5 Dimensioning Rules • Unless otherwise specified, all: • Dimensions and tolerances are measured at 20°C (68°F) • Dimensions and tolerances apply in a free state condition except for nonrigid parts • Tolerances apply for the full depth, length, and width of the feature • Dimensions and tolerances apply on the drawing where specified

  14. Fundamental ASME Y14.5 Dimensioning Rules • Coordinate systems: • Right-handed (arranged clockwise) • Labeled axes and positive direction shown • 3-D model complies with ASME Y14.41, Digital Product Definition Data Practices

  15. Dimensioning Components

  16. Dimensioning Symbols

  17. Unidirectional Dimensioning • Numerals, figures, and notes lettered horizontally • Read from the bottom of the drawing sheet • Mechanical drafting for manufacturing

  18. Aligned Dimensioning • Numerals, figures, and notes aligned with the dimension lines • Horizontal dimensions read from the bottom • Vertical dimensions read from the right side • Architectural and structural drafting 0

  19. Rectangular Coordinate Dimensioning without Dimension Lines • Ordinate dimensioning • Dimension values aligned with extension lines • Dimension represents a measurement originating from datums or coordinates • Features such as holes sized using specific notes or a table • Popular for: • Precision sheet metal part drawings • Electronics drafting

  20. Rectangular Coordinate Dimensioning without Dimension Lines

  21. Tabular Dimensioning • Form of rectangular coordinate dimensioning without dimension lines • Features dimensioned in a table

  22. Chart Dimensioning • Used when a part or assembly has one or more dimensions that change depending on the specific application

  23. Millimeter Dimensions • Millimeters (mm) • Common International System of Units (SI) unit of measure • General note: UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN MILLIMETERS • Follow any inch dimensions with IN

  24. Proper Use of Metric Units • Omit decimal point and 0 when dimension is a whole number • Precede a decimal value that is less than 1 with a 0 • When the value is greater than a whole number by a fraction of a mm, do not place a 0 next to last digit • Exception: when displaying tolerance values

  25. Proper Use of Metric Units • Plus and minus tolerance values have same number of decimal places • Limit tolerance values have same number of decimal points • Unilateral tolerances use a single 0 without a corresponding + or – sign

  26. Inch Dimensions • Decimal inches (IN) • United States (U.S.) customary unit of measure • General note: UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES • Follow any millimeter dimensions with mm

  27. Proper Use of Inch Units • Do not precede a value that is less than 1 inch with a 0 • Express a specified dimension to the same number of decimal places as its tolerance • Fractional inches generally indicate larger tolerance

  28. Proper Use of Inch Units • Plus and minus tolerance values have the same number of decimal places • Unilateral tolerances use the + and – sign • The 0 value has the same number of decimal places as the value that is greater or less than 0 • Limit tolerance values have the same number of decimal points

  29. Proper Use of Angular Units • Use decimal or degrees–minutes–seconds format • Angle and tolerance values have the same number of decimal places • Include 0°or 0°0″ when specifying only minutes or seconds, as applicable

  30. Using Fractions • Not as common as decimal inches or millimeters • Architectural and structural drawings • Generally indicate larger tolerance

  31. Arrowheads • Terminate dimension lines and leaders • Three times as long as they are wide • Consistent size • Filled in solid or open

  32. Dimension Line Spacing • First dimension line: • Uniform distance from the object • .375 in. (10 mm) minimum • .5 - 1.0 in. (12 - 24 mm) preferred • Succeeding dimension lines: • Equally spaced • .25 in. (6 mm) minimum • .5 - .75 in. (12 - 20 mm) preferred

  33. Dimension Numerals

  34. Chain Dimensioning • Creates tolerance stacking (tolerance buildup) • Omit one intermediate dimension or the overall dimension

  35. Baseline Dimensioning • Size or location of features controlled from a common reference plane • Reduces possibility of tolerance stacking

  36. Direct Dimensioning • Results in the least tolerance stacking

  37. Dimensioning Symmetrical Objects

  38. Dimensioning Cylinders

  39. Dimensioning Square Features

  40. Preferred Dimensioning Practices • Avoid crossing extension lines • Do not break extension lines when they cross • Never cross extension lines over dimension lines • Break the extension line where it crosses over a dimension line when necessary

  41. Preferred Dimensioning Practices • Never break a dimension line • Break extension lines when they cross over or near an arrowhead • Avoid dimensioning over or through the object • Avoid dimensioning to hidden features

  42. Preferred Dimensioning Practices • Avoid long extension lines • Avoid using any line of the object as an extension line • Dimension between views when possible • Group adjacent dimensions

  43. Preferred Dimensioning Practices • Dimension to views that provide the best shape description • Do not use a centerline, extension line, phantom line, visible object line, or a continuation of any of these lines as a dimension line • Stagger adjacent dimension numerals so they do not line up

  44. Dimensioning Angular Surfaces

  45. Dimensioning Chamfers

  46. Dimensioning Conical Shapes

  47. Dimensioning Hexagons and Other Polygons • Dimension across the flats

  48. Dimensioning Arc Radius

  49. Dimensioning Arc Length

  50. Additional Radius Dimensioning Applications • True radius • TRUE R followed by the actual radius • Controlled radius • CR followed by the radius • Spherical radius • SR followed by the radius

More Related