1 / 12

5.2 Forces & Equilibrium

5.2 Forces & Equilibrium. SOH CAH TOA too. Normal forces. If an object is NOT accelerating (at rest or a constant velocity) the net force must be zero. This means that all the forces must balance out and cancel.

yosef
Download Presentation

5.2 Forces & Equilibrium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 5.2 Forces & Equilibrium SOH CAH TOA too

  2. Normal forces • If an object is NOT accelerating (at rest or a constant velocity) the net force must be zero. • This means that all the forces must balance out and cancel. • The normal force is always perpendicular to the surface (not always up if surface is at an angle).

  3. Hooke’s Law • A spring always exerts a ‘restoring’ force - the force always acts to move the spring back to its ‘resting’ position. If you pull on the spring, it wants to pull back. If you push on the spring, it wants to push back. The force of the push is proportional to the displacement: F = -k•x F is force, k is the spring constant and x is the displacement the “-” means that the force is always opposite the displacement. • What are the units of k? (click for answer) K = -F/x so units are N/m

  4. Sine, Cosine, and Tangent SOH CAH TOA • Here is the secret of trigonometry – these are really just ratios (shh - don’t tell your math teachers) that we use in physics to figure out components of vectors in an easier way.

  5. SOH CAH TOA • Draw a right triangle on the board using a meter stick. • Measure the length of each side and the hypotenuse • Determine the angle

  6. SOH CAH TOA • We need to find the ratios of the sides • The sides are designated as adjacent to the angle or opposite the angle that is measured Opposite side hypotenuse angle Adjacent side

  7. SOH CAH TOA • Find the ratio of opposite/hypotenuse of the angle on the board. • This is called the “sine” of the angle. • Now determine the sine of the measured angle (use a protractor to get the angle). Opposite side hypotenuse angle Adjacent side

  8. SOH CAH TOA • The ratio of opposite/hypotenuse should equal the “sine” of the measured angle. • SOH: Sine = opposite / hypotenuse • This gives up the y component of a vector Opposite side hypotenuse angle Adjacent side

  9. SOH CAH TOA • Repeat for adjacent over hypotenuse • This gives the “cosine” of the angle. Check the cosine of the measured angle • CAH: cosine = adjacent / hypotenuse and is used to get the x-component. Opposite side hypotenuse angle Adjacent side

  10. SOH CAH TOA • Repeat for opposite over adjacent • This gives the “tangent” of the angle. Check the tangent of the measured angle • TOA: tangent = opposite / adjacent and is used to get the resultant if the x and y components are known. Opposite side hypotenuse angle Adjacent side

  11. SOH CAH TOA • Do a second example of a different triangle • Make sure you have your calculator in ‘degrees’ • Sample problem: • Draw a force vector of 14 n at 40° to scale • Determine the x and y components graphically • Determine the x and y components with trig(SOH CAH TOA). • Everyone do this and have a volunteer put on board

  12. Do p 113, 116, SP p 131 q 5-8 • 4 additional problems: Determine x and y components graphically & with trig for: a) 18 N @ 35°, b) 13 N @ 55°, c) find the resultant of Fx = 13.8 N & Fy = 6.9 N • If you move a chair, borrow a protractor etc. put it back!! It’s rude

More Related