Canon Pixma MG2522 Printer Setup, Driver Install And Troubleshoot

1. Simple Guide For Canon Pixma MG2522 Printer Setup Canon PIXMA MG2522 is an All-in-One printer that can print, copy, and scan. This printer comes with a flatbed scanner and supports both Windows and Mac Operating Systems. If you are setting up this printer for the first time, follow the below-mentioned steps for Canon Pixma Mg2522 Printer Setup.  You have to unpack the printer first and then take out the box contents such as the power cord, CD-ROM, user's guide, and ink cartridges.  Remove the protective tapes from the printer and make sure to recycle them.  Connect your printer to an electrical outlet using the supplied power cord and turn on the printer by pressing the Power button.  Lift/open the ink cartridge access door and wait until the print head moves to an idle position.  Unpack the ink cartridges and remove the protective seals from them.  Install the ink cartridges into the correct slot and close the ink cartridge access door.  Open the paper feed slot and slide the edge guide towards the left.  Fan a stack of plain paper and load it into the paper feed slot.  Adjust the paper by sliding the paper width guide towards the right.

2.  Make sure not to force the loaded paper with the paper width guide.  Open the paper output tray and pull out the paper support.  Next, insert the supplied CD-ROM into your computer's CD/DVD drive and run the driver installation.  Agree to the EULA and follow the on-screen prompts to complete the driver installation.  Finally, verify the printer functionality by printing a test page from your computer. Canon Pixma MG2522 Driver Download You can download the Canon PIXMA MG2522 printer's driver by clicking the Driver Download button on this page. However, you can download it from the official Canon site by following these steps. On the official Canon site, enter your printer's model number in the search field  and then select it from the search result. Click the Drivers & Downloads tab and select your OS version from  the Operating System drop-down menu. Choose the required printer driver from the displayed list and click  the Select button. Next, click the Download button and wait until the download is completed.  After completing the download, open the downloaded file to begin the driver  installation. Read more...