What Are Carbon Steel Pipes and plates

1. What Are Carbon Steel Pipes and plates Low-alloy structural steel, such as 16Mn, 5MnV, such as 10, 20, 30, 35, 45, etc., or alloy steel, such as 40Cr, 30CrMnSi, 45Mn2, 40MnB, etc., are used to make general carbon steel pipe. Fluid conveyance pipes are generally formed of seamless pipes made of low carbon steel, such as 10 and 20. For more information visit: https://www.ganpatind.com/astm-a106-gr-b- carbon-steel-pipe-supplier-exporter/

2. ASTM A106 GR. B Carbon Steel Pipes To Re-establish the ferrite–austenite balance, all forged ASTM A106 GR. B Carbon Steel Pipes should be solution annealed according to the heat treatment section. The HAZ can increase its ferrite content when the weld metal temperature of ASTM A106 GR. B Carbon Steel EFW Pipes is between 2100 and 2640 degrees Fahrenheit (1150 and 1450 degrees Celsius).

3. ASTM A106 Grade B Chemical Composition Grade C Grade A Grade B Carbon max. % 0.25 0.30 0.35 Manganese % 0.27 to 0.93 0.29 to 1.06 0.29 to 1.06 Phosphorus, max. % 0.025 0.025 0.025 Sulfur, max. % 0.025 0.025 0.025 Silicon, min. % 0.10 0.10 0.10

4. ASTM A333 GR. 6 Carbon Steel Pipes To manufacture ASTM A333 GR. 6 Carbon Steel EFW, no hydrogen should be supplied to the shielding gas under any circumstances. Cold cracking in the welded zone is avoided with pipes. To prevent nitrogen loss in the welded zone, N2 gas can be added to A333 GR. 6 Carbon Steel pipes. Intermetallic phases can affect the mechanical qualities of A333 GR. 6 pipes at temperatures 1110 Degree F and 1830 Degree.

5. ASTM A333 Gr.6 Carbon Steel Pipes Specifications Specifications : ASTM A333 ASME SA333 Dimensions : ASTM, ASME and API Size : 1/2” NB to 36” NB Thickness : 3-12mm Schedules : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules Type : Seamless / ERW / Welded / Fabricated Form : Round, Hydraulic Etc Length : Min 3 Meters, Max18 Meters, or according to customer’s requirement End : Plain End, Beveled End, Treaded

6. ASTM A515 Gr 60 Plates Lock wire, exhaust liners, and turbine seals are among of the uses for ASTM A515 Gr. 60 CS Sheets Plates. The nickel refractory metal is employed in the higher temperature of the heat utilised sections in iron base high-temperature alloys such as ASTM A515 Gr. 60 Carbon Steel Plates, which are typically only used up to 750 Degree D – 780 Degree C.

7. A515 Grade 60 Carbon Steel Plate Thickness Chart Thickness in Inches Width Length Lbs/Sft 3/16 48, 60, 72, 84, 96 96, 120, 124,133, 144, 156, 240 7.660 1/4 48, 60, 72, 84, 96 96,110, 120, 144, 240 10.210 5/16 48, 60, 72, 96 96, 120, 240 12.760 3/8 48, 60, 72, 84, 96 96, 120, 144, 169, 240, 260 15.320 7/16 96 240 17.870 1/2 48, 60, 72, 84, 96 96, 120, 144, 240 20.420

8. ASTM A515 Gr 70 Plates Because of the possibility of uniform and localised corrosion, ASTM A515 Gr. 70 Carbon Steel Slitting Plates should only be used in hydrochloric acid. In dilute hydrochloric acid, high–alloyed steels like ASME SA 515 Gr. 70 Carbon Steel Perforated Plates can be utilised because there is no one measure of corrosion resistance. The best steels to use for this purpose are the high nickel austenitic steels such as ASTM A515 Gr. 70 CS Plates.

9. ASTM A515 Grade 70 Plate Application Industries Off-Shore Oil Drilling Companies Power Generation Petrochemicals Gas Processing Specialty Chemicals Pharmaceuticals Pharmaceutical Equipment Chemical Equipment Sea Water Equipment Heat Exchangers Condensers Pulp and Paper Industry • • • • • • • • • • • •

10. About Us Ganpat Industrial Corporation is a prominent manufacturer, dealer, and supplier of stainless steel, high nickel steel, alloy steel, carbon steel, and other metals in the forms of pipe, fittings, flanges, fasteners, plate, round bar, wire, coils, and other products. GIC's corporate office is in Mumbai, and the company is dedicated to providing high quality and serviceability to all of its clients in the shortest possible period. For more information please visit: https://www.ganpatind.com/

11. Thank you