120 likes | 374 Views
Winter is just around the corner and you must be planning to turn your boiler on. Some maintenance of your boiler before the winter can not only help to save your money but it can also help to save your life. For more about boiler maintenance: http://www.aacheatingandcoolingservices.com/boiler-installation-maintenance/
E N D
Boiler Maintenance Winter is just around the corner and you must be planning to turn your boiler on. Some maintenance of your boiler before the winter can not only help to save your money but it can also help to save your life. This is a fact that faulty boilers can lead to very faulty accidents. A well maintained boiler can help to save money on your fuel and energy bills.
Maintain Your Boiler Annually • Boiler maintenance is crucial and it is a very good idea to get your boiler serviced every year so that its performance remains at optimum levels. You can hire a skilled technician to keep your boiler in check and to make sure that it is working perfectly.
2. Bleed the Radiators • When you would turn your boiler for the first time then you would realize that radiators are not working properly. This is because of the fact that there is air that is trapped inside the radiators. You can know it is air if it hot at the bottom and cold at the top.
3. Radiator Problems • Some of the more common problems of radiator are: • Painted over valve • Radiator is hot at top but not at the bottom • Radiator not heating at all These are some of the few important problems of radiator that you need to look after.
4. Balancing the radiators • Balancing the radiator can be tricky but an exercise that is worthy to be performed. Once you are done with bleeding the radiators, you would notice that some radiators are hotter as compared to others. This creates an imbalance in the heating. The fix for this problem is difficult and you would need a technician to help you out.
5. Checking the boiler pressure • When the boiler starts to work, you should check its pressure gauge to make sure that it is working as per the manufacturers recommended pressure levels. If the pressure is low then you will have to top it up.
For more about professional Boiler maintenance: http://www.aacheatingandcoolingservices.com/boiler-installation-maintenance/