1 / 14

Realtime Ethernet concept

Realtime Ethernet concept. Controller and HMI. Field devices. Motion control. 100ms. 10ms. <1ms. TCP/IP. Real-time. Ethernet as multi-purpose bus. Ethernet communication in automation Coexistent use of realtime and IT communication on one line

Albert_Lan
Download Presentation

Realtime Ethernet concept

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Realtime Ethernet concept Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  2. Controller and HMI Field devices Motion control 100ms 10ms <1ms TCP/IP Real-time Ethernet as multi-purpose bus • Ethernet communication in automation • Coexistent use of realtime and IT communicationon one line • Uniform realtime protocol for all requirements • Scalable realtime communication from high-performance to isochronous Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  3. OPC-DX IEC 61158 & IEC 61784 Ethernet based C. (IEC SC65C Digital Communication) ControlNet/IP PROFInet FF-HSE 1784-1 based RealTime Class 1 ????? CIP Run time; RT-Auto; ACCO FB AP| NMA| MIB SMK User FMS| SMKP| MIB FDA| SNTP|SNMP Application (7) DCOM Transport (4) Encapsulation TCP UDP TCP UDP TCP UDP Network (3) IP IP IP Data Link Layer (2) Modem, ISDN, wireless. ... RealTime Ethernet Class 2 PhLayer (1) IEEE 802.1, IEEE 802.3, IEEE 1588, IEEE 802.x.... Technology specific ISO/OSI Referenz Model Identical for all CPF Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  4. Realtime Ethernet • Realtime = deterministic data transmission • Ethernet = industrial communication based on IEEE 802 and switching technology • Realtime Ethernet (RTE) classes • No RTE: no provisions for deterministic communication • Low end = Class 1: Cycle times in the range from 5 to 10 msec. Fully compatible with the IP standard and no restrictions on networking components. • High end = Class 2: Cycle times in the range from 0,25 to 5 msec. Fully compatible with the IP standard with networking components supporting RTE Option. Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  5. RTE Class 2 for motion control • RTE Class 2 covers the requirements for the motion control applications market segment. • RTE Class 2 shall be also fully compatible with the IP standard - with no restrictions. Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  6. Wood-, glass-and ceramic-processing machines Plastics injection molding machines Packaging machines Printing presses Requirements for motion control applications Real-time capability Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  7. Switching technology - the basis for RTE • RTE utilizes switching technology: • Standard in the office world • Prospects for higher data rates • A large number of stations • Wide network expansion (cascades of 20 or more) • Electrical: 100 m per segment • FO: 3 km per segment • Full-duplex capability • Data streams remain local and do not place load on the entire network • Simple configuring rules Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  8. 1 1 Open IP channel • Device parameterization • Reading of diagnostics data • Loading of interconnections • Negotiation of the communication channel for user data RTE Class 1 channel • High-performance transfer • Priority Tagging • Cyclic data • Event-controlled signals RTE Class 2 channel • High-performance transfer • Data in isochronous mode • Jitter <1μsec Offener TCP/IP Kanal • Geräteparametrierung • Lesen von Diagnosedaten • Laden von Verschaltungen • Aushandeln des Kommunikations-kanals für Nutzdaten Echtzeit Kanal SRT • Performante Übertragung • Zyklische Daten • Ereignisgesteuerte Meldungen Industrial automation applications • IT appli-cations • e.g. • HTTP • SNMP • DHCP... 1 1 Real-time data Standard data TCP / UDP 2 2 Real-time IP 2 SRT RTE Cl.1 RTE Cl.2 3 2 Ethernet 3 Real-time switch Communication architecture with Switch • The RTE class 1 and 2 communication - an integrated and scalable solution - Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  9. Traffic jam jam jam Separate track to guarantee realtime RTE Cl.2 In case of a traffic jam, even the class 1 traffic stuck RTE-Protocol get priority compared to TCP/IP-protocol. RTE Cl.1 Non RTE Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  10. Concept for RTE Class 2 • Communication system scheduling - separate time domains for real-time and non-real-time - Open channel (IP) Open channel (IP) RTE channel RTE channel Cycle 2 Cycle 1 Cycle n E.g. 1 ms position control cycle Synchro-nization Deterministic communication Open communication RTE data IP data Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  11. 1 msec <1µsec 250 µsec <1µsec Cycle time Jitter Number of nodes Simultaneously transferable TCP/IP data *) 35 9MB/sec 18 6MB/sec 75 6MB/sec Performance parameters for RTE Class 2 *) Standard length of the IP data packets from 64 to 1536 bytes Max. data transmission rate on Fast Ethernet: 12 MB/sec Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  12. 15% 100% Distribution of updating times Occurence n RTE Cl.2 RTE Cl.1 Non RTE t 0.25...1.0 msec 10 msec 100 msec Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  13. Consequences to IEEE 802 • Enhancements to the IEEE 802.1D:2003 standard for RTE switched networks: • Amend RTE Option • In IEEE 802.1D or • Specify it separately in IEEE P802.1 or • Specify it separately in IEC SC65C. • Detailed Concepts will be described in IEC SC65C (IEC 61784-2) • Technical topics of the RTE option see next pages Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

  14. Technical issues on real time switching • Synchronized behaviour based on IEEE 1588-Sync • Common cycle time • Coordinated start of real time schedule • Scheduled forwarding • Shut down of non real time(RT) processing prior to RT phase • Disable non RT forwarding while a port is in RT phase • Scheduling list may be used to guarantee precise delivery • Coordination of application and communication • Ability to run control loops • Eliminate jitter of communication cycle by timestamping • Fast recovery from communication problems • Use redundant paths • Include a means for duplication detection Ludwig Winkel, Karl Weber IEEE 802.1 RTE 2004-01-14.ppt P:#

More Related