1 / 24

Level Measurement

Level Measurement. Intermediate Apprentice Week 3. Level Measurement. Level is another common process variable that is measured in many industries. The method used will vary widely depending on the nature of the industry, the process, and the application. . Inventory:

Anita
Download Presentation

Level Measurement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Level Measurement Intermediate Apprentice Week 3

  2. Level Measurement Level is another common process variable that is measured in many industries. The method used will vary widely depending on the nature of the industry, the process, and the application. • Inventory: • a constant supply or storage of material • Control: • continuous, batch, blending, and mixing control • stabilize flow to the next process • Alarming: • hi/lo limits, safety shut down • Data Logging: • material quantities for inventory and billing purposes and where regulatory requirements are necessary

  3. What is measured? The measured medium can be liquid, gas or solid and stored in vessels (open/closed tanks), silos, bins and hoppers. Units of level can be expressed in: • feet (meters) • gallons (liters) • pounds (kilograms) • cubic volume (ft3, m3)

  4. Methods – Direct or Indirect (inferential) • Hydrostatic Head • Float • Load Cells • Magnetic Level Gauge • Capacitance Transmitters • Magnetostrictive • Ultrasonic • Microwave • Laser • Radar • Guided Wave Radar • Dip Stick • Vibration

  5. Direct Methods Direct methods sense the surface or interface of the liquid and is not affected by changes in material density (Specific Gravity) Examples: • Dip Stick • Resistance Tapes • Sight Glass • Floats • Ultrasonic

  6. Indirect Methods (Inferential) Indirect methods “infer” liquid level by measuring some other physical parameter such as pressure, weight, or temperature. Changing materials means a corrective factor must be used or recalibrating the instrument. Examples: • Hydrostatic head methods • Load Cells • Capacitance • Conductivity

  7. Selection Criteria When determining the type of level sensor that should be used for a given application, there are a series of questions that must be answered: • Open tank or closed tank? • Can the level sensor be inserted into the tank or should it be completely external? Contact or non-contact? • Continuous measurement or point measurement? • Direct or Indirect measurement? • What type of material is being measured? Liquid or Solid? Clean or Slurry?

  8. Dip Stick • Simple and cheap • Can be used with any wet material and not affected by density. • Can not be used with pressurized tanks • Visual indication only (electronic versions are available)

  9. Resistance Tape The pressure of the fluid in the tank causes the tape to short-circuit, thus changing the total resistance of the measuring tape. An electronic circuit measures the resistance; it's directly related to the liquid level in the tank.

  10. Sight Glass Another simple direct method of measuring liquids. Can be used in pressurized tanks (as long as the glass or plastic tube can handle the pressure)

  11. Magnetic Level Sensors Used where the sight glass level gauge can not be. Magneto-resistive types can provide an electrical output. Liquid/liquid interface (such as water and oil) can be measured by changing the buoyancy of the magnetic float

  12. Floats Float rides the surface level to provide the measurement. Many different styles are available. Liquid density does not affect measurement

  13. Hydrostatic Head Level Sensors • These methods infer level by measuring the hydrostatic head produced by the liquid column. • A pressure sensing element is installed at the bottom of the tank and pressure is converted to level. • Different liquid densities or closed tank applications must be accounted for.

  14. Liquid Density (D) Height (H) Pressure PSI General Theory for Head Measurement The Pressure exerted by the Height of the liquid is: P = H x Density* If the Density of the liquid is known then H = Density* Pressure *Note: For liquids other than water, use the density of water 0.0361 lb/in3 as a reference and multiply by the SG of the liquid.

  15. Water Density (D) Oil Density (D) Height (H) Height (H) Tank 1 PSI Tank 2 PSI Example A dip stick measurement of the level of these 2 tanks indicates 30 feet of liquid in both tanks. Calculate the pressure that each gauge will read if tank 1 contains water (S.G. = 1) and tank 2 contains oil (S.G. = 0.85) P = ? psi P = ? psi

  16. Water Density (D) Oil Density (D) Height (H) Height (H) Tank 1 PSI Tank 2 PSI Example A dip stick measurement of the level of these 2 tanks indicates 30 feet of liquid in both tanks. Calculate the pressure that each gauge will read if tank 1 contains water (S.G. = 1) and tank 2 contains oil (S.G. = 0.85) P = ? psi P = H x Density = 30 ft x 0.0361 lbs/in3 = (30 x 12) x 0.0361 = 13 psi

  17. Water Density (D) Oil Density (D) Height (H) Height (H) Tank 1 PSI Tank 2 PSI Example A dip stick measurement of the level of these 2 tanks indicates 30 feet of liquid in both tanks. Calculate the pressure that each gauge will read if tank 1 contains water (S.G. = 1) and tank 2 contains oil (S.G. = 0.85) P = H x Density x SG = 30 ft x 0.0361 lbs/in3x 1 = (30 x 12) x 0.0361 = 13 psi P = H x Density x SG = 30 ft x 0.0361 lbs/in3x 0.85 = (30 x 12) x 0.0361 x 0.85 = 11 psi

  18. Liquid Density (D) Height (H) Pressure PSI Liquid Density (D) Height (H) Pressure PSI Practical Considerations when using head type instruments The reference point of the tank vs instrument input must be considered. This may not be practical in some applications where the tank elevation is below grade or where a remote visual reading is required.

  19. Water Density (D) Height (H) P P Tank Elevations Vertical rises and drops contribute to the overall height and therefore head pressure. Horizontal runs have no effect.

  20. Instrument input does not matter P Regulated purge system (air or nitrogen) Bottom of tube determines reference point Bubblers Bubblers allow the indicator to be located anywhere. The air pressure in the tube varies with the head pressure of the height of the liquid. Can’t be used in closed tanks or where purging a liquid is not allowed.

  21. P (atmospheric) P Head = h x D P vapour P Head = (h x D) + P vapour Closed Tank Applications Open tanks are vented to atmosphere so the pressure at the bottom of the tank is only due to the head pressure of the liquid. Closed tanks are not vented to atmosphere so the pressure at the bottom of the tank is due to the head pressure of the liquid + the vapour pressure above the surface.

  22. 4 – 20 mA mA 24 VDC To PLC or Controller Lo side open to atmosphere Using a d/P Cell Transmitter The differential pressure cell is one of the most common methods of measuring level. • Open Tank Measurement • Lo side of the d/P cell is left open to atmosphere. • Hi side measures the hydrostatic head pressure which is proportional to the height of the liquid and its density.

  23. Using a d/P Cell Transmitter In a closed tank, the Low side of the d/P cell is connected to the top of the tank and will cancel the effects of the vapour pressure above the surface. 4 – 20 mA mA 24 VDC To PLC or Controller H L • Closed Tank Measurement • Lo side of the d/P cell measures the vapour pressure above the surface. • Hi side measures the hydrostatic head pressure which is proportional to the height of the liquid and its density + vapour pressure

More Related