1 / 14

2150 Bombardier, Ste-Julie, Quebec, Canada, J3E 2J9

High Speed Labeller Coupon Applicator Model TP-8. WWW.TECHNO-PAK.COM. Tel: 450-922-3122 Fax: 450-922-3422. 2150 Bombardier, Ste-Julie, Quebec, Canada, J3E 2J9. HIGH SPEED LABELLER / COUPON APPLICATOR MODEL TP-8. ROBUST

Anita
Download Presentation

2150 Bombardier, Ste-Julie, Quebec, Canada, J3E 2J9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. High Speed Labeller Coupon Applicator Model TP-8 WWW.TECHNO-PAK.COM Tel: 450-922-3122 Fax: 450-922-3422 2150 Bombardier, Ste-Julie, Quebec, Canada, J3E 2J9

  2. HIGH SPEED LABELLER / COUPON APPLICATOR MODEL TP-8 ROBUST Machine entirely built of heavy gage stainless steel and anodized aluminium. Designed for intensive use in a harsh industrial environment. RELIABLE Provides superior performance with minimum maintenance and supervision. USER FRIENDLY Servo motor driven, this machine will quickly adjust to various labels/coupons and operating conditions. FLEXIBLE Applies promotion coupons and labels to the top or side of products at speed of up tofive hundred (500) products per minute.

  3. Label size: 5 ¾” wide by ⅜” to 20” long. Adjustable application height from 24” to 50” from floor. Servo motor driven. 16” diameter roll support. Rewinder powered by DC motor. Application speed: up to 200 ft /min. Precision +- 1/16”. Gap sensor for paper or plastic labels/coupons. Height & angular adjustments by hand crank. Friendly Operator Interface. Options: Alarm (beacon and buzzer), Actuated Appli-cation Arm, Locking Casters. Technical Characteristics

  4. 110 vac 10 amp (isolated circuit required) 80 psi Operating temperature (40°f to 105°f) Height: 58” to 84” Width: 40” Length: 35” Physical characteristics

  5. Top Application Labels/coupons applied on top of products. Machine can be installed over standard conveyors and can accommodate some conveyor speed variation. Heavy stainless steel construction built for millions of cycles with minimal maintenance.. Clickon both images to see video sequences showing a top label application. ( Maximum 500 PPM* )

  6. SIDE Side Application Label/coupon applied on side of products. Machine can be installed over standard conveyors and can accommodate some conveyor speed variation. Video sequence showing a side label application ( Maximum 500 PPM* )

  7. UNWIND & REWIND Roll Support & Rewinder Roll support: accommodates 16” diameter label/coupon rolls from 1” to 5 ½” wide. Heavy duty roll support mounted on bearings. Easy loading. Rewinder powered by DC motor

  8. Keyboard Interface STATE:STOP VP:470 E: PRINT COMPLETE FAIL I: S: Operator interface allows full control of the machine. User friendly keypad gives access to menus and settings. 4 alphanumerical lines informs user about machine status values and guidelines. Password protected access level

  9. Alarms Warnings Red light, fixed:Machine is stopped.. Red light, blinking:Abnormal stop, machine requires operator intervention. Yellow light, fixed:Machine runnning low in labels. Buzzer:Abnormal stop, machine requires operator intervention.

  10. Diagnostics I: E-STOP I: I 0 I 0 I I 0 0 0 I O: 0 I 0 I 0 O: 101010 Machine comes with a CD containing: Operation, maintenance and troubleshooting, instructions, drawings and pictures in color PDF format. Manual Controller interface display a descriptive error message. In addition to error messages, full diagnostic of every I/O is shown on display, for easy troubleshooting. Diagnostic Interface Screen

  11. Tandem Tandem Installation Drawing shows a tandem configuration. The first machine applies label on every product, while the second labeller stands as a backup. The first machine automatically commands the start-up of the second one when a fault occurs. No product is missed.

  12. Easy Startup • Install the machine next to or over existing conveyors, adjust the height and the guide rails to align products. • Connect the machine to 110 VAC (isolated line) and compressed air. • Adjust photo-eye and applicator settings according to the required label position and conveyor speed. • Insert your roll of labels on roll support and follow path instruction shown on machine.

  13. Additional Services Consumables: Techno Pak will guaranty performance if labels coupons meet specifications, from an approved supplier. Inventory: Techno Pak carries a large inventory of spare parts. Training: Complete training programs available for end users. Service: First class technical services offered for installation, training and troubleshooting. Turn Key: Turn key systems, including conveyors and controls, are affered by Techno Pak. Equipment: Other packaging equipments are available but not listed in this presentation. Please contact us for details.

  14. Thank you WWW.TECHNO-PAK.COM Tel: 450-922-3122 Fax: 450-922-3422 2150 Bombardier, Ste-Julie, Quebec, Canada, J3E 2J9

More Related