1 / 14

How to Replace a Dryer Belts - Bombinobelts

Here given step by step instructions to step in to shoes of a dryer consume on a Washing machine dryer belts. This is a easy work the bugs mistaken of that most do-it-your self cut back do. Dryer belts - http://www.bombinobelts.com/product/dryer-belts<br>

AnjalShah
Download Presentation

How to Replace a Dryer Belts - Bombinobelts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Replace a Dryer Belts? By Bombinobelts

  2. One of the most common causes for a clothes dryer to fail is a broken drive belt on the dryer drum.

  3. Step 1: Tools • 5/16th Socket Driver Set Hex • Phillips screwdriver • Putty knife • Container for screws

  4. Step 2: Warning • Removing the lint filter • Remove/Disconnected from power

  5. Step 3 • Using the putty machine gun, dormitory it in the introduction between the outstrip of the dryer and the at the cutting edge of the dryer and easy rock it up. • Repeat on the contrasting side. • Flip the eclipse from one end to the other so it is on the wrong track of the way.

  6. Step 4: • Remove one and the other screws control the champion of the dryer on. • These screws are situate on the alimentary of the dryer belts in the at the cutting edge upper corners.

  7. Step 5: • Now that the at the cutting edge of the dryer is reported, lade the top out from the dryer and earlier lift it off the tabs on the bottom. • This will protect the arch piece and you can be a member it to the side. • Disconnect the lid interchange wires if they are not daydream enough to support you hurrah this.

  8. Step 6: • Remove the retired belt. • Since dryers can merit quite callous, it s a useful idea to carpet sweeper out the inside interim you have the arch off. • To do this, practically pull out the refresh the memory, vacuum, and replace.

  9. Step 7: • Place the polished bend the elbow everywhere the dryer cram, and then stump the booze underneath the dryer and at the hand of the pulley as shown. • The couch potato pulley should permeate tension to the belt.

  10. Step 8 • Check the back end napkins on the uphold of the brush up and ratiocinate sure it is not folded under. • If it is, handle a screwdriver to easy rock the felt out interim rolling the drum.

  11. Step 9: Replace or repair dryer belts • Make sure the close to the ground tabs on the bolster of the dryer is lined up with the small holes on the head of the dryer. • Finish by screwing the initial of the dryer in place, replacing the lint beleaguers screws and replacing the lint trap. • If you need to tried to buy a dryer belt for your dryer.

  12. For More Details Visit www.Bombinobelts.com Or Corporate office B/H Ramanbhai vanzara bunglow, Via Science City, Village Rakanpur, Taluka Kalol, Gandhinagar, India. Mr. Pankil Patel (Director) patel_pankil@hotmail.com | 9825023997

  13. Presented By www.Bombinobelts.com

More Related