1 / 11

Friction

Friction. Holding in Place. Objects on an incline will often stay put. There must be a force that holds the object in place. Static friction is from the contact of resting objects. Force holds up to a certain point Force is based on the type of contact (rough, smooth)

Antony
Download Presentation

Friction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Friction

  2. Holding in Place • Objects on an incline will often stay put. • There must be a force that holds the object in place. • Static friction is from the contact of resting objects. • Force holds up to a certain point • Force is based on the type of contact (rough, smooth) • Maximum force is proportional to the pressing force of the object (normal force)

  3. Inequality • The approximate formula for static friction is: ms is the coefficient of static friction • This is an inequality. • The force of static friction is generally less than the coefficient times the normal force

  4. Use rope and measure the force when movement begins. Measure weight Measure force at slipping point. m1 Coefficient of Friction FT

  5. m q Slippery Slope • If Ffr < msFN = msmg cosq, then the block will hold. • At equality the block just begins to move.

  6. Sliding • Sliding objects also have a frictional force exerted on them. • This frictional force is kinetic friction. • An approximate formula: mk is the coefficient of kinetic friction

  7. Static and kinetic friction are similar. Force in opposite direction to motion Proportional to normal force Coefficient of friction depends on materials Static and kinetic friction are different. Static friction is an inequality up to a maximum Coefficient of friction is typically greater for static friction at the same surface Wood on wood (0.4 vs. 0.2) Static vs. Kinetic

  8. Downhill Skiing • A TV station has invited you to be the science commentator for an upcoming ski race. You observe that a skier needs at least 3° of slope to move forward at a constant velocity. • What is the coefficient of friction on the skis? q = 3°

  9. Force Diagram • At constant velocity the forces must all balance. • Friction doesn’t act in the direction of the normal force. • The normal force cancels the component of gravity. FN = mg cosq Ffr = -mkFN Fgy = -mg cosq Fg = -mg q

  10. Minimum Sliding • When the skier is sliding slowly we can neglect air resistance. • Kinetic friction balances the component of gravity pulling forward. FN = mg cosq Ffr = -mkFN Fgx = mg sinq q = 3°

  11. Normal Force and Friction • Friction depends on both the normal force and on the coefficient of friction. • To reduce friction requires reducing one of those factors. • Reduce normal force by lightening the load • Reduce normal force by adding additional upward force • Add a lubricant to reduce the coefficient of friction

More Related