Guide on How to Perform a Basic Car Inspection

1. A STEP-BY-STEP GUIDE ON HOW TO PERFORM A BASIC CAR INSPECTION START WITH A CLEAN CAR Inspect tires, lights, fluids, brakes, and more. Regular checks ensure a clean, safe, and well-maintained car. Drive confidently and responsibly. CHECK THE EXTERIOR Inspect tires for wear, bulges, and cuts. Use a pressure gauge for proper inflation. Test all lights, replacing burnt-out bulbs. Check the windshield for cracks. Test and replace wipers if necessary. LOOK UNDER THE HOOD Inspect engine oil by checking the dipstick, ensure the coolant level is correct, and inspect brake, power steering, and transmission fluids for proper levels, identifying potential issues. INSPECT THE INTERIOR Start the car, check dashboard warning lights. Promptly address warnings. Test controls (AC, heating), windshield wipers, ensure gauges (speedometer, fuel) function correctly. Drive assured. CHECK UNDERNEATH THE VEHICLE Inspect exhaust for rust, holes, or damage. Check for unusual noises. Examine the ground for oil, coolant, or brake fluid leaks beneath your parked car. Prioritize prompt attention. TEST THE BRAKES Check brake pads through spokes for thinning. Test brake pedal at low speed—firm feel, no sinking. Unusual noises or vibrations signal potential brake issues. Time for inspection or replacement. TAKE A TEST DRIVE Listen for odd sounds like squeaks, rattles, or thumps. Assess steering responsiveness and overall handling for a smooth and safe driving experience. DOCUMENT YOUR FINDINGS Maintain an inspection log documenting issues, repairs, and maintenance tasks. This valuable record aids future inspections and guides visits to the mechanic for optimal car care. TO KNOW MORE ABOUT BEST CAR SERVICEIN NEWZEALAND VISIT - WWW.AUTOSUPERSHOPPES.CO.NZ