1 / 25

Dolby AC-3 Audio Encoding & THX

Dolby AC-3 Audio Encoding & THX Wai Kam (Winnie) Henele Adams Peter Boettcher Multichannel Audio Audio used in film and various entertainment ranges from mono to stereo to 5.1 system Wideband Audio: 48 KHz *16 bits * 6 Channels= 46.08 Mbits/sec AC-3: Digital Audio Coding

Ava
Download Presentation

Dolby AC-3 Audio Encoding & THX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dolby AC-3 Audio Encoding&THX Wai Kam (Winnie) Henele Adams Peter Boettcher

  2. Multichannel Audio • Audio used in film and various entertainment ranges from mono to stereo to 5.1 system • Wideband Audio: 48 KHz *16 bits * 6 Channels= 46.08 Mbits/sec

  3. AC-3: Digital Audio Coding • Flexible Multi-channel coding: encode up to 6 channels and downmix according to the listener’s available resources • Current Standard for HDTV audio compression; also used in LD, DVD • Sample rates: 32 KHz, 44.1KHz, 48KHz • Data rates: 32 Kbps to 640 Kbps • 1st AC-3 coded film: Star Trek VI in Dec. 91

  4. AC-3 Encoder • Frequency Domain Transform: • 512 point MDCT with 50% overlap • 2 x 256 point MDCT in transient signal • Bit allocation in floating point representation: • Mantissa and Exponent are represented differently • Bits of Mantissa are adaptively allocated

  5. AC-3 Decoder 1st Step Recover Mantissa according to Psychoacoustic model, inverse transform and de-mux to different output channels Recover PCM values for each channel 2nd Step

  6. Bit-stream Syntax 1 Frame represents 1536 PCM samples for all channels Frame Structure SI=Sync. Info BSI=Bitstream Info CRC for error correction Aux Data for private control 1 Block represents 256 PCM for each channel Block Structure

  7. Encoding Philosophy • Encoding Goals • Minimize perceived sound quality degradation • Keep the bit-rate within set value • Bit allocation strategies • forward-adaptive • backward-adaptive • parametric bit allocation

  8. Forward Adaptive

  9. Backward Adaptive

  10. Parametric Bit Allocation • Hybrid of Forward and Backward strategies

  11. Parametric Bit Allocation • Core is Backward Adaptive • Primary Modifications • Psychoacoustic model parameter adjustment • Delta Bit Allocation

  12. Filter Banks • Filter Bank construction • Overlapping blocks of 512 windowed samples • Block 10.66 msec long (@48kHz) • Adjustments for transients

  13. Spectral Envelope • Coefficients coded into an exponent and a mantissa • Allows wide dynamic range • Precision limitations in mantissa introduce noise • Exponents characterize the spectrum • Spectral envelope

  14. Spectral Envelope • Coding • DC sent as absolute • Exponents sent as differentials • Groups of 3 encoded into 7 bit blocks • Four exponent encoding strategies • D15, D25, D45, and REUSE

  15. Spectral Envelope

  16. Bit Allocation • Psychoacoustic Reductions • Pool of bits for all channels • Adjustments made to SNR • Coping with Bit rate Conditions • coupling

  17. 5.1 Channel Surround Sound • 5 main channels - L, C, R, LS, RS • 1 LFE (low-frequency effects) channel • bandwidth is approximately 1 tenth, thus .1 • Unlike analog Dolby Surround, AC-3 5.1 format includes 6 discrete channels, but coded together for efficiency

  18. Recommended Setup • Left and Right stereo pair 45-60 degrees off center • Surround speakers to side and slightly to rear (110 degrees) • All speakers equidistant from listener, or use appropriate time delays in system. • Subwoofer anywhere

  19. Bass Management • The subwoofer channel is NOT the same as the LFE channel • LFE channel is created by the sound engineer at mixing time • The subwoofer channel is produced by the decoder at playback time • Dolby recommends caution in creating LFE channels at all

  20. Use of the Channels • Front channels: • Phantom center (like stereo), center channel alone, or both • Surround channels: • Enhance depth and immersion • Not well established • LFE: • Only special bass effects

  21. Decoder Downmixing

  22. Decoder Downmixing • Decoder adjusts playback for equipment • 5.1 audio track can be mixed down to 4 channel surround or stereo • Dynamic range reduction, LFE channel elimination

  23. THX • Two needs identified: • A need to correct the audible tonal and spatial errors caused by the playback of soundtracks designed in and for large theatres in the smaller environment of a home. • A need to more accurately reproduce the complex and competing sound fields present in multi-channel sound playback. • Plus, George Lucas wants to make money

  24. THX Certification • “THX is like the Good Housekeeping Seal of Approval. It certifies that the product performs to a rigorously high standard that makes sense. THX provides the confidence and reassurance a consumer needs in a purchasing decision.” -- Steve Baker, V.P. Sales & Marketing, Denon Electronics

  25. Questions • What are the primary differences between MPEG audio and AC-3 coding? • MPEG audio uses the forward adaptive bit allocation scheme whereas the AC-3 method uses the hybrid (parametric) scheme discussed earlier. • The bitstream formats are different and allow different extensions and capabilities.

More Related