1 / 16

Setting Out Joiners Rods “extracts from Practical Australian Carpentry”

Setting Out Joiners Rods “extracts from Practical Australian Carpentry”. M. S. Martin Original 2005 Revised 2008. Setting Out Of Rods. Set out rods are basically detail drawings for the purpose of constructing joinery items These drawings can be on paper and used in the workshop or

Ava
Download Presentation

Setting Out Joiners Rods “extracts from Practical Australian Carpentry”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Setting Out Joiners Rods“extracts from Practical Australian Carpentry” M. S. Martin Original 2005 Revised 2008

  2. Setting Out Of Rods • Set out rods are basically detail drawings for the purpose of constructing joinery items • These drawings can be on paper and used in the workshop or • Drawn onto a piece of plywood • Sometimes ply is used for stability and paper over laid on top for clarity • Approximate size for a sample window 150mm – 200mm wide

  3. Example Of Rod – Height & Width

  4. Points To Consider When Setting Out A Rod • Dimensions Accurate – any inaccuracies will carry through to project • Sections should always be drawn with the face of the item facing the person setting out • Sections drawn full size and show clearly actual size of members • The rod should be easy to interpret, remove any set out lines • A cutting list should accompany the rod

  5. Making the Rod • Straighten one edge and secure rod to bench, overlaying 10-15mm on bench • All gauging is done from this straight edge with pencil • Squares or rule and forefinger can be used • Use actual section pieces to help you set out • Gauging and step by step on following slides.

  6. Gauging

  7. Step By Step Setout Of Rod • Mark off the overall height and gauge a line to represent the interior face of the frame. Use short lengths of the stock material, cut from scrap, as templates to mark in the outline of each section. • After the sill is marked, continue with the head, first positioning the storm moulding and then locating the head relative to it. Using short lengths of sash stock, mark in the sash top and bottom rails, and space the bars in between .

  8. Step By Step Setout Of Rod Continued • Proportion the mortise-and-tenon joints, mark in and cross the mortises. • Follow a similar procedure with the horizontal section, first setting off the width and locating the storm mouldings, followed by the other members. • Finally prepare the cutting list.

  9. Marking Out Stiles • Read in conjunction with handout notes

  10. Stiles In Pairs

  11. Marking Out Stiles

  12. Marking Out Rails

  13. Sash Joints

  14. Sash Joints Continued

  15. Squaring Sash

More Related