Pourable ,Condensation Cure Mold Making RTV2 Silicone Rubber

1. BK-H Series Pourable ,Condensation Cure Mold Making RTV2 Silicone Rubber Mold silicone purposes Mold silicone is widely used in Polyster , Epoxy, polyurethane foam molding products, PU resin decorations and the replication of arts and crafts, antique furniture, ceramics, craft candles, gypsum products, european-style components, large-scale sculpture, copy of cultural relics, building decoration, furniture, anaglyph imitation marble, artificial imitation of natural stone statue, shoe's molding, lighting, crafts, the human body, imitation bronze craft, model establishment, simulation landscape of many industries, such as mold manufacturing. Many industries are less essential quickly copy the use of the product. Product data (at room temperature 23℃) Typical general characteristics Color Mixed Viscosity cps Hardness Density at 23℃ ℃ Tear strength N/mm Tensile strength Elongation at break Mpa Linear shrinkage Mix Ratio By Weight Pot Life Cure time H20 H30 Milk white 25000 20 1.08 g/cm³ ＞22 ＞400 ＞4.0 MPa <0.2% 100A:1.5B 15-20 3-4 Milk white 35000 30 1.08 g/cm³ ＞28 ＞350 ＞4.5 MPa <0.2% 100A:1.5B 15-20 3-4 % Customer feedback data type Mold for Poly Resin(GRP) Mold for PU foam Mold for Rigid PU Mold for Gypsum Mold for Concrete (GRC) The data is our customer feedback, are for reference only. Times 200-400 above 120-200 above 40-120 above 1000 Above 160-250 above (Don't appear white) Action description RTV - 2, mould silica gel, silica gel, a general designation of two-component RTV silicone rubber, it has excellent liquidity, good operability and join at room temperature curing agent 1-1.5%, 20 minutes can be the operation, 2 to 3 hours later will be generated, not deformation, high temperature resistance, acid and alkali resistant, not the expansion of the elastic silicone mold, is POLI handicraft, resin handicraft, the decorative lighting, candles and other crafts of the complex mode and precision mold manufacturing. Technical data sheet for BKSILICONE BK-H Series/ Version: 2.1 / Date of last alteration: 11.11.2016 2/ 1

2. Mold silicone characteristics 1. With no deformation, high temperature resistant, resistant to acid and alkali, not the characteristics of expansion. 2.Good shrinkage ratio, complex mode, more mold silicone shrinkage in two over one thousand. 3. Pull, good elasticity, tear strength, make your products not only beautiful, but also allows you to make the product deformation, high temperature resistant in 200 degrees to all have no problem, and 50 degrees below zero mold silica gel is still not brittle, is still very soft, the simulation effect is very good. Shelf life Under the room temperature is 25 c, do not open the packing, 12 months Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 5 kg, 20 kg, 25 kg and 200 kg . Storage and transportation Mold the silicone should be stored at room temperature, dry bath and the sealing of the container, please do not contact with water in case of metamorphism. This product with no dangerous goods transportation. Technical data sheet for BKSILICONE BK-H Series/ Version: 2.1 / Date of last alteration: 11.11.2016 2/ 2