Perfection in Effective Room Insulation-coolmachines.com

1. Perfection in Effective Room Insulation-coolmachines.com Heat always rises. It escapes almost unhindered when ceilings are under or rarely heated rooms or directly under flat roofs and are not sufficiently insulated. A heat-insulating underlay remedy by providing a thermal separation. The use of the cool insulation machines is perfect in this case now. This is the best deal you can have now. Further information on the subject can be found in the guide Heat insulation saves a lot of energy. To the advisor Thermal insulation saves a lot of energy 1. Build substructure Cover the ceiling: As a scaffold for the heat-insulating ceiling, you first build a substructure of wooden slats: Dowel the slats laterally in the wall. Backfill them with equalization tiles if the wall is not straight. All other woods anchor with metal plugs (6 mm screw diameter) in the ceiling. The distance between each slat should be half the width of the later cladding (e.g. plasterboard). The use of the cool insulation blowing machines is important later. For that you will need to have a perfect deal here. Smart opportunities are also there in this case from the best options now. 2. Insulating layer and vapor barrier Damp blanket: cut and clamp the panels Use a cutter knife to cut the insulation slightly larger and clamp it between the slats. If you insulate ceilings to unheated rooms, a vapor barrier is absolutely necessary - otherwise the insulation material will become permanently damp and no longer dampen. To do this, tack a special vapor barrier film under the already installed insulation to the slats. The use of the cool insulation blower happens to be essential in this case now. Damp cover: Mask off foil with sealing tape Then glue the overlapping webs with sealing tape - also at the end to the wall. 3. Ceiling covering Covering the ceiling: Plasterboard panels Finally cover the so insulated ceiling - for example, with plasterboard. These are relatively cheap and can also be easily processed. This is the part you will need to do after the blown insulation machine usage. 4. Heat and noise protection in one

2. If you are also disturbed by noise "from above", a so-called suspended ceiling helps. Another advantage - especially with high ceilings in old buildings: heating costs in winter fall because less room volume has to be heated. The effective options for the insulation blowers work perfectly now. Damping the ceiling: attach metal hangers to the dowels To do this, do not screw the wooden substructure directly into the ceiling, but attach it to adjustable metal hangers, which in turn fasten them in the ceiling with dowels. The hangers ensure a uniform distance and the necessary cavity (at least 40 mm). Cover the ceiling: Fill the material with the cavity Damping blanket: bolt in a horizontal escape with the hangers Then screw the slats from the right and left with the hangers and fasten the ceiling cladding in sections (e.g. plasterboard). The resulting cavity between the ceiling and cladding is now filled with insulation material.