1 / 11

Unist Australia Pty Ltd. - Solutions We Provide

Today Unist Australia covers the territories of Australia and New Zealand and is helping many progressive companies convert over to Minimal Quantity Lubrication (MQL).Contact Us:Unist Australia Pty Ltd.7 Bendtree Way, Castle Hill, NSW 2154, Australia‎Phone: 02 8850 2022Mob: 0418 274946Fax: 02 8850 2033Web : www.unist.com.au

BiancaSawyer
Download Presentation

Unist Australia Pty Ltd. - Solutions We Provide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solutions We Provide www.unist.com.au

  2. Contents • About Us • Our Solutions • Metal Cutting • Cooltube Lubricants • Metal Forming • Wearpoint Lubrication • Application Videos • Contact

  3. About Us In 2006 Unist Australia Pty Ltd was founded by John Barker, John had a previous working relationship with Unist Inc. For over 20 years. Today Unist Australia covers the territories of Australia and New Zealand and is helping many progressive companies convert over to Minimal Quantity Lubrication (MQL).

  4. Our Solutions

  5. Our Solutions • Metal Cutting • There is the OLD way and then there is the NEW way. The old way uses mineral oils mixed with water which are then called metalworking fluids. Unist Australia eliminates the OLD way (flood coolant) and replaces it with a cost effective alternative.

  6. Our Solutions • Coolube Lubricants • These days, “going green” is a concern for many manufacturers and implementing Minimum Quantity Lubrication (MQL) with UnistCoolube® is an easy step in that direction. MQL is the process of applying minute amounts of high-quality lubricant directly to the cutting tool/work piece interface instead of using traditional flood coolants.

  7. Our Solutions • Metal Forming • The patented uni-Roller Systems will stop problems such as a messy press, slippery floors, and stamped parts soaking in coolant. We have solutions for material from 25mm to over 1800mm wide. We have the answers for metal formers struggling to apply fluid cost effectively and consistently.

  8. Our Solutions • Wearpoint Lubrication • Approximately 50 percent of bearing failures and 60 percent of mechanical failures can be tracked to inadequate or improper lubrication. Often there are so many wearpoints to lubricate that your standard maintenance procedures just can’t keep up with them all. But the price for not maintaining them can take an unecessary toll on your maintenance and repair budget.

  9. Our Solutions • Application Videos • See Our Videos: • http://unist.com.au/solutions/application-gallery.html

  10. Unist Australia Pty Ltd. Contact Today: 7 Bendtree Way, Castle Hill, NSW 2154, Australia‎ Ph no: 02 8850 2022 johnbarker@unist.com.au www.unist.com.au

  11. Thank You

More Related