Download
1 / 1
10 likes | 10 Views
Brass is a durable material that is most commonly used in manufacturing bushings. Bushings are components that provide surfaces for two moving parts to glide against each other. Brass bushings are used in water pumps, electric motors, and other applications. Hi-bond is a trusted bearings and bushings dealer in the USA to purchase brass bushings. Read to know more about uses for brass bushings.
E N D
Uses for Brass Bushings Hi-Bond Bearings Pvt. Ltd. is a leading supplier of a wide range of high-quality bearings and bushing for the mechanical engineering and manufacturing industries. Brass is an alloy of copper and zinc. It is a solid and durable metal that is frequently used in variety of industries. Bearing and bushings manufacturing companies use various materials, but brass is often the preferred choice due to its high resistance to wear and its low coefficient of friction. Let us see a closer look at brass bushings and some of their common uses. Propeller shaft bushings: The propeller shaft of a boat or ship sooner or later goes through the hull and connects to the propeller. The Propeller Shaft Bushings are usually made of brass. Another advantage is that brass does not rust, making it an excellent choice for a marine environment. These bearings are made from a mixture of brass and polyethylene, durable plastic. Water pumping bushing: Water pumps are in all water- cooled automobile engines, and the pump includes a brass bushing for the main shaft. The shaft bushing is made of brass, which has anti-rust and anti- friction properties in contact with steel. To prevent water from entering the bushing, a rubber seal is placed on the inner surface of the housing that contacts the shaft. This seal allows a little fluid to seep through and lubricate the bushing. Manufacturers never advise using simply water. Instead, they suggest fluids with built-in lubricants to help combat friction between the bushing and the water pump shaft. Slide Bearings: A machine shaft may not rotate but instead, slide in and out of an arrangement at times. This motion is seen in the operation of automatic document feeders, which move the print head back and forth on paper to feed it. The material is soft enough to allow a snug fit on the shaft yet not so soft that it wears away quickly. The friction between the shaft and the bushing is further reduced by adding a small amount of oil or grease to the surface. Visit our website: https://hibond.com/
