Easy Steps To Install A Car Dash Cam Yourself

1. Easy Steps To Install A Car Dash Cam Yourself A dashboard camera is now considered a necessity for cars as a safety accessory. However, fitting a dash cam in a car is a lot of work for most car owners. Some of these systems are too complex, and you might not fix one as you wish. However, installing a dashboard camera is very easy, and you can do it from home. Doing it yourself also saves you money, helping you learn more about the camera functions. Since all dashboard cameras are different, the installation steps will differ depending on the brand. However, the steps listed below are common for most modern camera models. Step 1: Clean the Windshield Before you start, locate the spot where you want to install the car dashcam and wipe using a cloth. This process removes any oils or dirt on the windshield glass. Step 2: Install Windshield Mount After confirming the cleanliness of the area, proceed to paste the windshield mount. The KENT CarCam 2 has a mount with an adhesive side. Peel off the protective cover and place the mount on the windshield below the rearview mirror. Ensure the mount is well-centred because it will take more effort to remove and position after pasting on the glass. Once it sticks to the glass, push the locking lever up to hold it in position.

2. Step 3: Install Camera on Mount After setting the mount, unfasten the nut on the car dash cam and push it to fit into the mounting bracket on the windshield mount. Ensure the camera is perpendicular to the dashboard for better viewing angles. Once done, tighten the nut to secure the camera on the dashboard mount. Step 4: Run the Cables and Start the Camera The Kent CamEye CarCam 2 package has a USB-C cable connecting the dashboard camera to a power source. However, having cables hanging from the windshields obstructs views and clutters the cabin; hence finding better ways to tuck in the wire. This cable should be run inside the trims to conceal them from sight. With the prying tool in the camera package, lift the vehicle trims and place the cable. This cable should run towards the vehicle’s dashboard through the passenger side via the A-pillar. Connect the cable to the camera and the other end to a car charger and plug it into the power outlet. Press the power button on the Kent CamEye CarCam 2 to start it. Step 5: Install Mobile App To complete the installation process, it is necessary to install a mobile application that serves as the camera’s interface. After downloading the mobile app, users will scan the code at the back of their

3. cameras for activation. Car dash cams with live streaming connect through Wi-Fi or SIM card provided by the manufacturer. Depending on the type of connection, set up the camera to allow live streaming on your mobile phone. The app also allows sending of real-time security alerts when the vehicle is in parking or when it records an event. Installing a dash cam is very simple and will take less time. The only challenge is concealing the cables to keep the dashboard tidy and uncluttered. Nonetheless, you will always find a way to reach the power supply and power the camera. Source URL https://losanews.com/easy-steps-to-install-a-car-dash-cam-yourself/