Comparison Between Architectural Scale Ruler And Engineering Ruler Scale

1. Article: Custompromotionalrulers.com COMPARISON BETWEEN ARCHITECTURAL SCALE RULER AND ENGINEERING RULER SCALE Architectural Scale Rulers: The architectural scale rulers are used in order to obtain the dimensions from scaled drawings of a live project. It is usually three-sided comprising of 11 scales called triangular scale or flat comprising of 4 scales. It ranges in lengths from 4" to 36" in which the 12" models are used most widely. Earlier, it used to be made up of wood, but now days it is mostly made up of materials like plastic, aluminium, and stainless steel. The most commonly used architectural scale rulers are: 16 (full), 3, 1-1/2, 1, 3/4, 1/2, 3/8, 1/4, 1/16, 1/8, and 3/32. The main divisions of each scale stands for feet, further divided into 12ths or 16ths. Any scale labelled as 1/8 means 1/8" = 1' (or 1/96 scale). The 16 scale also known as a full scale is a standard ruler having very mark signifying 1/16". An architectural scale ruler may be read from the left or right side depending on the type of scale that is being used. The most commonly used architectural scale ruler for residential buildings’ floor plans is the 1/4 scale. This scale helps to make the plans manageable in size so as to provide a fair amount of data to be noted. Big structures like shopping malls need a relatively smaller scale (1/8 or 3/32) to be able to fit the drawing on paper. Certain features like doorways require a much larger scale (1-1/2), to depict the detail. Engineering Ruler Scale: The engineering ruler scale is used for determining the length and converting those measurements to different scales and ratios of the actual length. It is triangular in shape with the three faces comprising of two diverse scales on each markings. In some places the scales are labelled as 10, 20, 30, 40, 50 and 60, with equal graduations that represent the decimal fractions of an inch, which implies that, 1”= 10’-60’. The engineering ruler scale is usually made up of plastic and is a little over 12” in length, but due to only 12” of markings, it leaves the ends unmarked. The additional length prevents wear and tear that occurs with time and alsostops the ends from smudging off. Though it is similar looking to an architectural scale ruler, the engineering ruler scale is designed to be more accurateand it has a decimal scaling system. It is designed to only be read from left to right. On the contrary, the architectural scale ruler uses fractional scaling. It can be read from the left as well as the right side. The engineering ruler scale is mostly used by civil engineers. Typically, these scales are 1" = 100' for plan views, 1" = 5' for vertical, and 1" = 100' for horizontal profile. It can also be used for greater precision requirement as compared to that of an architectural scale ruler. For example: for the purpose of making printed circuit boards along with the spacing between the integrated circuit leads set = 1/10 of an inch. Visit Custompromotionalrulers.com to know more about triangular rulers, machinist rulers and x ray rulers. ABOUT THE AUTHOR Killian CustomPromotionalRulers.com as the best place to buy these tools online. His articles are a great source of information for anyone looking for architectural scale rules or some tips to make the best purchases. Jones is an expert in architectural stationery and machinist rulers and recommends