Know The Steps to Make Bead Pendants

1. 6 Steps to Make Bead Pendants

2. 1. Use Thin Head Pins and Select Your Beads It is recommended to use head pins that are skinny (narrow in width) that has at least 1 1/4 inches (3.2 cm) of length above the bead to make the wrapped wire loop sleekly. It’s your choice if you want to use plain or ornamental head pins. Same you can do while selecting the type of beads. Matte or glass beads, silver/gold plated Roundel’s or may be certain Gemstones that vary in physical properties as well. Cool jewelry beads for saleshow can only pull off well if you know how to cut clutter. Just be sure that whatever choices you’ll make in the beginning, they are going to be crucial in putting the pendant together.

3. 2 - Slide the Beads One by One onto the Head Pin Once you’ve carefully selected your beads and pins. Start sliding beads slowly onto the head pins and string the bead onto the head pin so that the bottom of the bead gets fixed against the ‘head’ of the head pin. If your bead hole is smaller or larger than the head of the head pin, you will have to skip this step and laid back again onto the first one.

4. 3 - Take Hold of Round Chain Nose Pliers Chain nose pliers referred to as flat-nosed pliers is a quality tool that you should buy ASAP as its applications are enormous in making beads pendants in bulk for a kick off starting a jewelry business. You can shop for beads from a dollar store online. These chain nose pliers are useful in many pendant’s wire wrapping. Grasp the head pin by the nose of the tool and ready for a surprise. Grasp directly above the bead and with your fingers bend the top of the head pin at 90-degree angle. You can get your hands on it from available jewelry making supplies and tools online and buy them cheap. It’s easy to work with them especially when processing a thin bead wire pendant.

5. 4 - Reposition Nose Pliers for making A Wire Loop text here Reposition the pliers and place it above the bend of the head pin. In this way, the bottom jaws of the pliers should grasp the top of the wire loop between the jaws. Grasp the loop between the jaws of the nose pliers. Grasp the wire end with the chain nose pliers. You can bend multiple wires at a single time, but we would suggest you go easy on every move you make. This is your first time making a bead pendant, and we don’t want a mishap.

6. 5 - Wrap the Wire Ends Two to Three Times After you have finished making a wire loop, You’re close to the end. Hold firmly on both pliers. Bring the wire's end within the chain nose around the standing wire and begin wrapping the wire end and make it a goof two-to-three times wraps with force. This way you are close to making nice bead pendants.

7. 6- Slide Your Pendant Onto The Chain Congratulations on making your first perfect bead pendant! It’s time to give the pendant a slippery slide onto the chain (any stringing material you’d like to glide your pendant in). You can try various stringing materials with your pendant to see which one is suitable. In the future, you can remove it when you get turned off from the design and create a new one to uphold versatility at jewelry making.

8. Thank You To know more visit: https://dollar-king.net/arts-and-crafts/beading-jewelry-and-supplies.html