Get protection From Lightning Strikes

1. Get protection From Lightning Strikes Lightning strikes may not be the most commonly observed phenomenon, but this does not validate the point that one can avoid lightning protection for building because lightning is an uncommon but dangerous phenomenon. Lightning is a naturally destructive force that we have no control over. Can your building tolerate 100 million Volts of electricity? Let’s get all the information in detail with this write-up.

2. Who needs lightning protection? If your building has a water body near or a porous structure, you should consider getting lightning protection for buildings more seriously. Since the energy in lightning transmits in heat and sudden transfer of a significant amount of heat to the water body, it turns into steam. The sudden expansion of water into steam can result in an explosion; this is why moisture-rich trees get frequently destroyed by lightning strikes. Historic constructions that don’t have inbuilt protection and wooden barns are examples of structures that are most likely to be destroyed by lightning. What is a Lightning protection System? A lightning protection system constitutes eating, air termination, equipotential bonding, down conducting, surge protection, and a fail-safe scheme during lightning. Safety through Design LPS ensures protection against direct and indirect lightning strikes not only to people and services concerned with that specific structure but also to the high- value assets. The valuable assets can be vulnerable to damage by lightning due to the surge caused by LEMP (lightning originated electromagnetic pulse). The proper assessment of design can be done based on the following points: •Adequate sizing and selection of components •Calculation of protection radius •Selection and measurement of surge protection devices •Risk assessment •Striking the distance for stations Electro-geometric modeling needs to be explicitly followed as per Rolling Sphere Method for the further zonal protection layout. The rolling sphere method involves the mesh conductor and angle of protection for radius protection and air terminals.

3. Specifications for a lightning protection system: •Monitored Annually •Installed by a capable contractor •It should have been designed as per the standards which are internationally accepted by a competent engineer. •Validated and Verified by a third-party inspector after installation. All the points should be double-checked because installing off-the-shelf equipment without verified design cannot ensure adequate safety against lightning. Following the minute specifications is not sufficient for a 100% secure system, but understanding contextual designing variables and execution of customizable solutions is also necessary. Who can install lightning protection products? Lightning can be a destructive force, so it is essential to seek expert help to combat the harmful effects of lightning. To get the installation of the lightning protection system right, it is essential to choose a contractor who has comprehensive knowledge of the whole process and holds a valid certification. These little details are crucial for judging if the contractor’s methods are the latest and if they meet the standards. Looking for these small details ensures the safety of your house. ECS offers such reliable services. ECS’s streamer emitters, charge dissipation terminals, and traditional lightning protection systems; quality, durability, and performance of these products are guaranteed. ECS’s services ensure complete protection against any dangers. Contact us and save yourself from any dangers of lightning. Source: strikes https://ecsintl.mystrikingly.com/blog/get-protection-from-lightning-