1 / 5

2019 Updated CWNP CWT-100 Questions Killtest

Read CWT-100 free demo questions for find the CWT-100 questions updated in 2019 from Killtest are great for passing CWT-100 exam. The most updated CWNP CWT-100 questions are the perfect way to prepare CWT-100 exam with good grades in the just first attempt. CWT-100 exam questions are just listing of CWT-100 questions and answers and many people demonstrate that they get success in their IT exams by getting 2019 Updated CWNP CWT-100 Questions Killtest.

Emma2017
Download Presentation

2019 Updated CWNP CWT-100 Questions Killtest

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The safer , easier way to help you pass any IT exams. 1.In what way are 802.11 channels defined? A. By a high frequency and channel width B. By channel width alone C. By a center frequency and channel width D. By a low frequency and channel width Answer: B 2.What can occur when two copies of a signal wave arrive at the receiver at the same time, but 180 degrees out of phase which each other? A. Increased signal amplitude B. Bits may be added to the total count C. Increased signal strength D. Signal nulling or cancellation Answer: D 3.What is defined as the bending of an RF wave as it passes through a medium? Select one: A. Reflection B. Refraction C. Absorption D. Scattering Answer: B 4.What metric is most commonly used at the receiver to report the signal strength? Select one: A. dBm B. Watt C. Milliwatt D. Nanowatt Answer: A 5.At what point is RF power typically stipulated in milliwatts? A. At the transmitter B. Fifty feet from the transmitter C. At the receiver D. One hundred feet from the transmitter Answer: A 6.How many channels are available in the 2.4 GHz frequency band in all regulatory domains? Select one: A. 3 B. 14 C. 13 D. 11 1 / 3

  2. The safer , easier way to help you pass any IT exams. Answer: B 7.How many non-overlapping channels are available in regulatory domains in the 2.4 GHz frequency band? Select one: A. 14 B. 1 C. 3 D. 11 Answer: C 8.What antenna would be best for a long distance (more than 5 kilometers) bridge link? Select one: A. Panel B. Parabolic dish C. Patch D. Omnidirectional Answer: B 9.What kind of antenna chart shows the radiation pattern of an antenna from the side view of that antenna? A. Top-down B. Azimuth C. Horizontal D. Elevation Answer: B 10.In what kind of device is a mini-PCIe 802.11 adapter most likely to be used? A. Desktop B. Mobile phone C. Laptop D. USB adapter Answer: C 11.Of the following device types, which one is most likely to be used in a highly mobile (use while in motion) use case? A. Desktop B. Video camera C. VoIP handset D. Laptop Answer: D 12.What is a common problem in specialty Wi-Fi devices? A. The use of 802.11 VHT-only chipsets 2 / 3

  3. The safer , easier way to help you pass any IT exams. B. The use of older, less capable 802.11 chipsets C. The use of 802.11 DSSS-only chipsets D. The use of newer, more capable 802.11 chipsets Answer: B 3 / 3

More Related