2019 Updated Dell EMC E20-575 Questions Killtest

2. The safer , easier way to help you pass any IT exams. 1.What is determined by setting the priority level on a Consistency Group (CG)? A. Amount of time before sending an automated notification stating a watermark has been reached B. Amount of bandwidth allocated to the CG in relation to all other CGs using the same primary RPA C. CG(s) that requires the most resources from the primary RPA, regardless of other system activity D. Order in which the CG will begin replication in the event a failover occurs Answer: C 2.Which RecoverPoint CLI command can be used to show a summarization of the errors and warnings for either one site or the entire RecoverPoint system? A. get_rpa_states B. get_events_log C. get_system_status D. get_clusters_topology Answer: B 3.When replicating a Consistency Group between clusters using XtremIO at each site that are connected through Fibre Channel, what is the maximum throughput per RPA? A. 150 MB/s B. 240 MB/s C. 300 MB/s D. 450 MB/s Answer: C 4.A physical RecoverPoint cluster is connected to a single VMAX array. When running SAN diagnostics form the boxmgmt menu, what is the minimum number of WWPN can be seen in the storage ports section of the diagnostic test? A. 1 B. 2 C. 3 D. 4 Answer: B 5.A storage administrator has one production site and one remote site. The administrator configured the RecoverPoint with VNX (SE) cluster at both sites. The current environment has two Consistency Groups configured with two copies each; one production copy and one remote copy. Based on the company’s growing business requirements, the administrator has been asked to keep a local copy of the production data. Which action should occur in order to meet this requirement? A. Add a copy into the existing Consistency Group for a local replication B. Delete and reconfigure the existing Consistency Group for a local and remote replication C. RecoverPoint with VNX (SE) does not support more than two copies in a single Consistency Group D. Upgrade the RecoverPoint with VNX (SE) license to RecoverPoint/EX and then reconfigure the Consistency Group Answer: D 1 / 3

3. The safer , easier way to help you pass any IT exams. 6.In Unisphere for RecoverPoint, which wizard will allow an administrator to manage and monitor all correctly accessed copies undergoing testing, failover, and production recovery? A. Protect Volumes B. Test a Copy C. Manage Protection D. Manage Recovery Answer: B 7.A RecoverPoint administrator is adding a new user to the system using Unisphere. Which pre-defined user is used to add a new user? A. admin B. boxmgmt C. security-admin D. security Answer: A 8.What occurs when Journal volumes are masked to hosts in a RecoverPoint environment? A. Hosts are able to write to the Journal volumes but will lead to Journal corruption B. Splitter is attached to the newly exposed Journal volumes C. RecoverPoint GUI and CLI logs an event confirming the masking has occurred D. Journals become available for use in the “Consistency Group” wizard Answer: A 9.In order to balance the workload of a RecoverPoint system, an administrator decided to change the primary RPA for specific Consistency Groups. Where is this setting configured? A. Copy Policy tab for the production copy B. Group Policy tab for the Consistency Groups C. Copy Policy tab for the remote copy D. Link Policy Tab for the Consistency Groups Answer: B 10.In a RecoverPoint environment, which EMC array supports Snap-based replication? A. XtremlIO B. Data Domain C. Unity D. VPLEX Answer: A 11.A storage administrator has created a new Consistency Group with a remote copy. After enabling the new group, the administrator notices several other Consistency Groups are experiencing high load alerts. What is possible cause for the high load conditions? A. Initialization is consuming all the WAN bandwidth 2 / 3

4. The safer , easier way to help you pass any IT exams. B. Journal pool for the new Consistency Group is undersized C. Journal pool for the new Consistency Group has poor performing storage D. Not enough licensed replication storage is available for the new Consistency Group Answer: B 12.Which parameter is used as the Locking ID for a RecoverPoint/CL license? A. RecoverPoint Cluster ID B. RecoverPoint System ID C. Array serial number if VNX arrays are used D. VPLEX Cluster ID if protecting virtual volumes Answer: A 13.A RecoverPoint administrator needs to add a local copy to three existing Consistency Groups. The RecoverPoint system currently contains 100 Consistency Groups. Each group has one remote copy with 80 replication sets. Each cluster contains eight physical RPAs. However, the administrator is unable to add all the local copies. What is a cause for this issue? A. Consistency Group copy cannot have 1024 volumes within the copy B. Cluster has the maximum number of RPAs and cannot be expanded C. Addition of the local volumes will exceed the 16K volume limit per cluster D. RecoverPoint system needs to be converted to a RP/EX system to support the extra volumes Answer: A 14.During the Write phase of RecoverPoint replication, when does the write splitter send an acknowledgement back to the host that initiated the write? A. As soon as the splitter received the write B. After the splitter has received an acknowledgement from the RPAs C. After the Distribution phase has completed D. After the splitter has received an acknowledgement form the production LUN Answer: A 15.What is the minimum size of a Journal when using Distributed Consistency Groups? A. 10 GB B. 20 GB C. 40 GB D. 80 GB Answer: C 3 / 3