H35-561 HCIP-LTE-RNP&RNO V1.0 Free Guide V12.02 | Killtest

2. 1.Which of the following protocol sublayers are not part of the control plane? A. SlAP B. GTPU C. NAS D. SCTP Answer: B 2. TDD and FDD are different duplex technologies, which use time slots and frequencies to distinguish between uplink and downlink. A. True B. False Answer: A 3. RB is the smallest resource granularity in the LTE system. A. True B. False Answer: B 4. The SFBC is a transmit diversity technique, which obtains the transmit diversity gain primarily for the area with a lower SINR, such as a cell edge. Compared with STBC, SFBC is an empty frequency two-dimensional transmit diversity, while STBC is a space-time two-dimensional transmit diversity. A. True B. False Answer: A 5. In the LTE system, which is the advantage of applying 64QAM compared to 16QAM? A. Improved spectrum utilization B. Improved anti-noise, anti-fading ability C. Reduce the system error rate D. Simpler implementation Answer: A 6. Which channel does not use link adaptation technology? A. BCH B. MCH C. PCH D. DL-SCH Answer: A 7. Which of the following description of the PCRF QoS controls is wrong? A. QoS parameters are issued by PCRF B. Can achieve session-level QoS control C. Can achieve service-level QoS control

3. D. QoS does not include bandwidth control Answer: D 8. Which of the following is not a key concern for PCI planning? A. Frequency B. TA ownership C. RS position D. Cell location relationship Answer: B 9. According to the definition of the protocol, the maximum transmit power of the LTE UE is 23dBm. A. True B. False Answer: A 10.Which of the following goals of wireless network planning will affect the results of coverage estimation? (Multiple Choice) A. Network target load B. Target business edge throughput C. Target user type D. Target coverage probability Answer: ABD 11. The PDSCH carries DL-SC and PCH information. A. True B. False Answer: A 12. Regarding the CSG cell, which of the following descriptions is wrong? A. The same user can belong to multiple CSG cells B. The CsG cell is part of the PLMN, and each CSG cell has a CSG ID. C. All CSG cells sharing the same CSG identity can use different radio access technologies D. The UE maintains a list of CSG ID2 of the CS cells to which it belongs (ie, the listed of csG that allowed), and other CSG cells outside this list are inaccessible to the UE. Answer: C 13. Which cell may be carried in the RRC CONNECTION REQUEST message? A. S-TMSI (TC-RNTI) B. Preamble C. SRB1 parameters D. AMBR Answer: A

4. 14. Regarding the format of the LTE randomly accessing preamble, which of the following are correct? (Multiple Choice) A. Format 0 - 3 can be user FDD cell, or user TDm cell B. Format 0 - 3 can only be used for FDD cells C. Format 4 can be used for TD cells and can also be used for FDD cells. D. Format 4 can only be used for TD cells Answer: AD 15. Which of the following radio bearers can carry MAS messages? (Multiple Choice) A. SRB0 B. SRB3 C. SRB1 D. SRB2 Answer: CD 16. Which of the following are the QoS parameters in the EPC? (Multiple Choice) A. CQI B. ARP C. MBR D. GBR Answer: ABCD 17. Which parameters may be carried in the air interface paging message? A. Pagingattemptcount B. cn-Domain C. TAC D. ueidentityindexvalue Answer: C 18. Which of the following is a timer for periodic TAU? A. T3212 B. T300 C. T3412 D. T3413 Answer: C 19. Which of the following information will be issued through "RC Connection Reconfiguration”? (Multiple Choice) A. Switch command B. Default bearer DRB establishment information C. SRB1 establishment D. Measurement configuration information Answer: ABD

5. 20. Which of the following factors will affect the coverage distance of LTE downlink? (Multiple Choice) A. RRU power B. The base station uses 4 sets of receiving antennas C. Cell bandwidth D. Using distributed base stations, RU is placed close to the antenna to reduce feeder and jumper losses. Answer: ABD 21. What is the mainly content that carried by MIB (Master Information Block)? (Multiple Choice) A. System frame number B. PHICH resource information C. Bandwidth D. SI word information Answer: ABCD 22. About the description of the drop rate indicator in the LTE road test indicator, which of the following is wrong? A. Drop rate = number of drops / number of successful completion of connection establishment B. Dropping: Aborting the data transfer during the data transfer process in the end, including the RRC connection disconnection or the data rate is reduced to 0 for 5 seconds. C. The drop rate refers to the concept of an abnormal business interruption occurring during the course of business, that is, the number of abnormal interruptions and the total number of business. D. Dropping means that when the mobile phone does not send Disconnect signaling or does not receive the Disconnect/Release signaling issued by network, the mobile phone returns to the idle state, and it is regarded as a dropped call. Answer: D 23. Which of the following carries the scheduling information of the PUSCH? A. DCI format0 B. DCI format1 C. DCI format1A D. DCI format1B Answer: A 24.The purpose of PRACH power control is under the premise of ensuring the enodeb random access the success rate, the UE transmit the leader with the minimum power. A. True B. False

6. Answer: A 25. In the VOTE solution, what is the QCI of the video stream? A. QCI＝1 B. QCI＝2 C. QCI＝5 D. QCI＝9 Answer: B