Step-by-Step Guide on Installing a Square Shower Enclosure

1. Step-by-Step Guide on Installing a Square Shower Enclosure Replacing typical showering spaces with contemporary-styled square shower enclosures has been the most popular bathroom renovation project in the recent decade. Unlike other bathroom fixtures, a square shower cubicle will give your room a refined, contemporary look all by itself. Besides their sleek modern outlook, their convenient installation and assembly make square showers so popular. Are you a passionate DIY person who’s well-equipped with plumbing and installation tools? Then fitting a shower cubicle in place of your basic shower system will be straightforward.

2. All you need to do is fix brackets against the wall, screw the upper and rear portions of the cubicle on top, assemble the doors, install handles, and there it is! Your brand-new square shower cubicle is ready for use. Remember, the shower tray is to mount and level first while the tilework is laid out. If you have the guts and expertise to handle the job, we have a complete guide waiting for you. DIY Installation of a Square Shower Enclosure? Here is a method of DIY fitting square shape cubicles. 1. Check the Cubicle Kit to Ensure all Parts are on hand Before you start assembling the parts and fixtures of your cubicle unit, check the kit to ensure all details are available. Though vendors normally ship all necessary items and fixtures and items alongside, you don’t know what might be missing. After all, no one wants to revisit the outlet for a tiny missing object. 2. Level Out and Mount the Shower Cubicle Brackets to the Wall These are designed to be mounted alongside the wall, the erected brackets pin the shower frame against the wall right above the shower tray. Once you attach it to the wall, the brackets are used as mounting bricks that keep the cubicle holds up straight and sturdy. While fitting a square shower enclosure, the brackets must be attached alongside the upper hand of the shower tray at a 5mm distance from the front. Don’t forget to use a spirit level to keep them straight and aligned. Here are a few key factors to note when installing them on different surfaces. ● When fixing them on tiled bricks or block walls, use an 8mm tile drill with a 6 mm masonry bit to drill a hole deep enough for seamless mounting. Screw them through the bracket using a wall plug. In the case of a plyboard, use the same 8mm drill bit and drill out a hole into the tiled wall until you reach the plyboard inside. Use wood screws to mount the brackets onto the wall firmly. As for cement and plasterboards, you will need to carve a 10mm crack into the tile. Also, drill a 3mm pilot hole into the walls using tile drill bits. Apply the red drive fixing process to place the brackets. ● ●

3. 3. Set up the Frame of Your Enclosure Once the backstage lays out, it’s time to construct the frame. Start assembling one side at a time. You might need an aide to stick down one side of glass walls while you attach sealing strips on the other side for fitting. Install the rear of the glass panel onto the square frame and fit them into place using screws. While your aide holds one side of the frame, you mount the other panel using the same strategy. Moreover, apply a quality sealant to the entire frame length, ensuring it doesn’t wobble after some time. 4. Mount the Square Shower Cubicle Against the Brackets After fully assembling the shower cubicle, gather some friends and family members to carry it onto the designated spot. Make sure to carefully manoeuvre inside the bathroom due to the fragile glass panels. When positioned right into place, align the vertical panels into the vertical brackets previously installed on the wall. Also, ensure the shower tray is in level correctly so the cubicle doesn’t seem out of place or irregular. 5. Install the Shower Doors Whether you are installing sliding shower doors or simple or pivot ones, you might need to assemble them separately. For slider-type doors, attach the packed waves to the base of the plate that is meant to be slid on dedicated tracks. Once fully mounted, apply another pair of hands to fit the entry door straight on the roller tracks. As for the top end of the panel, slide the cover to the rear side and screw it against the fixed wall in the cubicle. Make sure not to over-tighten it enough to risk breakage. 6. Sealing and Fitting Handles It’s time for the final finishing. Attach handles onto doors for an easy and hassle-free sliding mechanism. Keep into account the exact position of the rollers on the track before mounting the door. Apply a final coat of sealant after everything is placed, ensuring your square shower enclosure stays durable for a long time.