90 likes | 325 Views
We are a certified laboratory in the category of Measurement Science and Technology for the provision of Electrical
E N D
Electrical Instrument Calibration • ISO 17025 – 2005 "General requirements for the competence of testing and calibration laboratories“ • We are a certified laboratory in the category of Measurement Science and Technology for the provision of Electrical & Electronic instrument calibrations, see our comprehensive scope here.
AS 1024-1971 " Direct recording electrical measuring instruments and their accessories“ • AS 1042-1973 "Direct – acting indicating electrical measuring instruments and their accessories“ • AS/NZS ISO 10012:2004 "Metrology confirmation system for measurement equipment"
AS 1284.1-2004 Electricity metering - General purpose induction watt-hour meters • AS 1284.11-1995 Electricity metering - Single-phase multifunction watt-hour meters • AS/NZS 1284.13:2002 Electricity metering - In-service compliance testing
Multimeters are a vital tool to many professionals in both laboratory and field operations. The results presented by the multimeter are used to make key decisions on maintenance of expensive and key equipment. • A multimeter that is reporting incorrectly due to lack of calibration can result in the wrong decisions being made which has the potential for equipment damage. Make sure that the tools of your trade are working as they should – get your multimeter calibrated at a minimum cost.
Our Sydney based laboratory is equipped with state of the art precision electrical measuring instrumentation with technically competent technicians performing the calibration of electrical instruments. • Our services are well sort after based on our professionalism and strict adherence to our certification. Our technicians are also well trained to undertake repairs to electrical instruments economically and within good turnaround time.
Electronics • Ammeters • Current Transducers • Decade Boxes • Digital Storage Instruments • Energy Meters • Graphical Chart Recorder • LCR Meter • Multi-Meters • Oscilloscopes (Multi Channel) • Power Meters • Power Analysers • Process Instrumentation • Process Meters • Scope Meters • Signal Generators • Volt Meters • Watt Meters
Electricals • Appliance Testers • Current Transducers • Earth Resistance Testers • Hi-pot Testers • Insulation Testers • Mega ohm meters • Mggers • Power meters • Voltage Transducers
HK Calibration Technologies PTY. LTD Contact Today: Unit 8/20 Loyalty Road, SYDNEY, NSW, 2151, Australia Ph no: 1300 309 881 Fax no : 1300 885 178 info@hkcalibrations.com.au www.hkcalibrations.com.au