iPhone LCD AND DIGITIZER REPLACEMENT? It’s Easy If You Do It Smart

1. iPhone 6 LCD AND DIGITIZER REPLACEMENT? It's Easy If You Do It Smart iPhone is the fragile phones, whose screen can be easily damaged. IPhonecome with the one year warranty, after the purchasing. If you have broken the iPhone screen you probably need to repair as soon as possible,you can easily and cheaply do it at home. The inexpensive repairing kit or the simple tools that might you help to replace your screen, Power off your phone: Power off your phone, when you start the disassembly process. Lift up the screen: Remove the screw from the base of the phone: it is very useful star-shaped screwdriver to unscrew at the base of the phone. The base is located under the home button, not to drop the small screw. Use the portable screwdriver, have five points to unscrew Apply the Suction Cup on the screen: Use the suction cup on the bottom half of the screen. Put down firmly, so, it sticks to the broken screen. If the suction cup has the problem to stick up to the screen. You can slightly moisten the suction cup and press it against the screen. Use the packaging tape: If the screen is too much damage and glass is broken is many parts. If the suction cup would not work in the screen, you can cut the strips of the clear tape and cover the screen with the smooth and apply the suction cup to cover the screen. Note: not to cover the home button, when putting the clear tape or the suction cup. Pull up the suction cup: Gently pull up the suction cup while you hold the phone down. You may firmly pull up the screen several times, it comes out from the screen, Insert a pry tool: once the screen is starting to lift away at the bottom corner, take a thin pry tool and insert it under the underneath the screen, gently take the pry tool and slide it along the button to loosen the screen, The repair kit comes with the plastic slider or guitar packs that you can insert once, you have begun prying up the screen. Gently and slowly slide the pry tool around the entire edges. Avoid to pulling up the screen that could damage or split the screen home button. Lift up the screen: Hold the bottom of the phone and place the fingertips on the one side of the phone, the thumb is one the one side of the screen index and middle finger are on the opposite side, gently lift the screen about 90 degree If the screen is still connected with the wire, don’t completely remove the screen.

2. Remove the components: Remove the top right shield The small metal plate has three screws, and need to remove the screws, and remove the shield from right to left, Release the connector Under the metal shield, you will see the rubber-like connectors to keep the screen and bottom of the screen together. You can release each ribbon, and start with one to top, you can lift the screen away, Remove the top metal plate of the earpiece: When you lifted the screen, you will see the metal plate inside the phone, choose the Pantalone screwdrivers and remove the two tiny screw, so that you can lift the small plate. Take out the home button screw: At the bottom of the phone, you can see the metal plate covering the home button. By using the peantalobe screwdriver, you can remove the small screws. Unscrew and lift away the back plate: You see the small screw on the back side of the plate. Use the peantalobe screwdriver and remove the back plate Installing the new screen: Install the home button: Place the home screen button and set the metal home button over it, and use the peantalobe. Need to make sure that sticker of the home button sticks down. Reattach the top connector Attach the small metal tip of the connector, that connector goes back into the top of the phone. The camera should be set on the exposed hole if you had properly done the procedure in a correct way. Secure the back plate: Set the metal backplate over the phone and screw it back. There are two screws on the plate The screw is available in the different sizes, it is important to use the right screw and correctly screw back into the phone. Reattach the earpiece: You can set the earpiece back in the top right corner of the phone, find the screws and fit them back into the earpiece.

3. Connect the new screen to iPhone You have ribbon-like connector coming out from the new screen, insert them into the phone and make sure, insert the bottom connector and insert the top connector at the last. The connectors must be inserted correctly. Remove the screen and check the connector. Press the new screen onto the phone: Once the phone and screen are properly connected, lower the screen into the place of the screen, make sure the guides are properly connected. No gaps should be found along the top. The firmly press the screen onto the phone from the top to bottom side, you should not have any gap between the phone and screen. Now you can turn on your phone and use it. iShine offers cheap iPhone parts in the UK. All the mobile accessories in UK and mobile parts can be obtained at wholesale prices. You can easily buy all types of mobile parts and accessories with the premium quality.