1 / 10

Steps To Troubleshoot A Print Head Not Installed On A Canon MP470

Canon Pixma MP470 colour inkjet printer gives you higher productivity, right in your home and Office.There tips helps to make the troubleshooting lot easier. If you need help about a Canon Printer you can call on 64-48879118. Know more about: http://canon.printersupportnumber.co.nz/

JanHodgess
Download Presentation

Steps To Troubleshoot A Print Head Not Installed On A Canon MP470

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steps To Troubleshoot A Print Head Not Installed On A Canon MP470

  2. As a printer is an electronic device, so you may face some technical glitches at some point of time while using the device. There are several issues which you may face in your daily life regarding the printer device. There are troubleshooting steps available through which you can easily resolve the problem. The Canon Pixma MP470 color inkjet printer is designed to detect the issues related to your printer and report them to the operator.

  3. This system helps to make the troubleshooting lot easier. If at any point of time, any error message is displayed on the screen saying the print head is not installed, then immediately resolve this issue. To resolve this issue, you have to follow the step-by-step guidance given by Canon printer helpline New Zealand.

  4. Step 1 First, turn on your device and open the top cover of your device. Wait, until the cartridge carrier stops moving. Now, lift the cartridge out of the printer by tilting it in forward direction carefully.

  5. Step 2 Now, at the bottom of the cartridge, examine the electrical contacts. Make sure that contacts are not covered by any tape. The tape is often attached to the new cartridges to prevent the leakage from them. The printer will not be able to sense the cartridge if you will not remove that tape. This is the cause, you may receive the error of 'Print head not installed'. If any issue occurs while following these steps, you can call the Canon printer contact number New Zealand.

  6. Step 3 Remove all the cartridges from the printer and check for the tapping and other obstructions. You can clean the cartridges and check for the leakage. If any leakage is found, then replace the defected cartridge.

  7. Step 4 Now, take a soft cloth and clean the ink cartridge carefully. You can use a small vacuum cleaner which is especially designed for cleaning the computer components.

  8. Step 5 Finally, place the ink cartridges back into the printer and close the top cover. Power cycle the printer, if the error message does not go away immediately.

  9. There were few Steps To Troubleshoot A Print Head Not Installed On A Canon MP470. During following these steps if you face any kind of issue then dial Canon printer customer support number +64-48879118. Here our technical expert is always available to providing you tech support for Canon Printer issues.

  10. Original Source- http://bit.ly/2kuKXju • http://bit.ly/2jGuG7n For more information Contact us Thank you

More Related