1 / 32

Introduction to Converter Sampled-Data Modeling

Introduction to Converter Sampled-Data Modeling . ECEN 5807 Dragan Maksimovi ć. Objectives. Better understanding of converter small-signal dynamics, especially at high frequencies Applications DCM high-frequency modeling Current mode control Digital control. v* ( t ). D/A. A/D.

Jims
Download Presentation

Introduction to Converter Sampled-Data Modeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Converter Sampled-Data Modeling ECEN 5807 Dragan Maksimović

  2. Objectives • Better understanding of converter small-signal dynamics, especially at high frequencies • Applications • DCM high-frequency modeling • Current mode control • Digital control

  3. v*(t) D/A A/D v(t) vo(t) Analog-to-digital converter Digital-to-analog converter v(t) t v*(t) t vo(t) t nT (n+1)T (n+2)T T = sampling period 1/T = sampling frequency Example: A/D and D/A conversion

  4. Modeling objectives • Relationships: v to v* to vo • Time domain: v(t) to v*(t) to vo(t) • Frequency domain: v(s) to v*(s) to vo(s) v(t) t v*(t) t vo(t) t nT (n+1)T (n+2)T T = sampling period 1/T = sampling frequency

  5. Model v*(t) D/A A/D v(t) vo(t) Analog-to-digital converter Digital-to-analog converter v*(t) H v(t) vo(t) T Sampler Zero-order hold

  6. Sampling v*(t) v(t) T Sampler v(t) t v*(t) t Unit impulse (Dirac)

  7. Unit impulse d(t) area = 1 s(t) t Dt Properties Laplace transform unit step

  8. Sampling in frequency domain

  9. Sampling in frequency domain: derivation

  10. Sampling in frequency domain: derivation

  11. Aliasing

  12. Zero-order hold v*(t) H vo(t) Zero-order hold v*(t) t vo(t) t nT (n+1)T (n+2)T T = sampling period 1/T = sampling frequency

  13. Zero-order hold: time domain H d(t) vo(t) Zero-order hold

  14. Zero-order hold: frequency domain H u(t) vo(t) Zero-order hold

  15. Sampled-data system example: frequency domain v*(t) H v(t) vo(t) T Sampler Zero-order hold Consider only low-frequency signals: System “transfer function” =

  16. Zero-order hold: frequency responses

  17. Zero-order hold: frequency responses fs = 1 MHz MATLAB file: zohfr.m

  18. Zero-order hold: 1st-order approximation 1st-order Pade approximation

  19. Zero-order hold: frequency responses fs = 1 MHz MATLAB file: zohfr.m

  20. How does any of this apply to converter modeling?

  21. PWM is a small-signal sampler! PWM sampling occurs at tp (i.e. at dTs, periodically, in each switching period)

  22. General sampled-data model • Sampled-data model valid at all frequencies • Equivalent hold describes the converter small-signal response to the sampled duty-cycle perturbations [Billy Lau, PESC 1986] • State-space averaging or averaged-switch models are low-frequency continuous-time approximations to this sampled-data model

  23. Application to DCM high-frequency modeling iL c dTs d2Ts Ts

  24. Application to DCM high-frequency modeling iL c dTs d2Ts Ts

  25. DCM inductor current high-frequency response High-frequency pole due to the inductor current dynamics in DCM, see (11.77) in Section 11.3

  26. Conclusions • PWM is a small-signal sampler • Switching converter is a sampled-data system • Duty-cycle perturbations act as a string of impulses • Converter response to the duty-cycle perturbations can be modeled as an equivalent hold • Averaged small-signal models are low-frequency approximations to the equivalent hold • In DCM, at high frequencies, the inductor-current dynamic response is described by an equivalent hold that behaves as zero-order hold of length D2Ts • Approximate continuous-time model based on the DCM sampled-data model correlates with the analysis of Section 11.3: the same high-frequency pole at fs/(pD2) is obtained • Next: current-mode control (Chapter 12)

More Related