Pre Terminated Fiber Optic Cable Assemblies Usa

1. Pre Terminated • Fiber Optic Cable Assemblies Usa

2. Falcon Tech Specialize in Pre Terminated Fiber Optic Cable assemblies to support data intensive networks, For your choice of multi mode Fibers OM1, OM3, OM4, single mode OS2 cables in 6, 12 or 24 strand using the most popular connector types. Patch cords, hydra patch cords, MPO trunk assemblies and multi-fiber cable assemblies are available from Falcon Tech, offering convenience, reduced complexity, versatility and robustness. For more than 25 years Falcon Technologies has been providing customers with high quality assemblies and sub assemblies. Delivering high quality products on time is our first priority. • Introduction

3. 1. 2. 3. 4. • Pre Terminated Fiber Products 5. 6. 7. 8.

4. 1. • A swivel pulling eye is attached to protect against stresses associated with pulling the fiber optic assembly into position during installation. The pulling eye acts as a strain relief by distributing the stress over the outer jacket and eliminating it from the fiber optic strands. Fiber assemblies will often twist during installation causing breakage of the strands. The swivel feature of the pulling eye prevents this twisting. The fiber optic connectors are encased in the mesh sheathing of the pulling eye to prevent damage and make it easier to pull the assembly through conduit, duct, walls, etc. 2.

5. 3. • Direct-Buried Cable (DBC) is designed to be buried under the ground without any additional covering, conduit or sheathing to protect it. This Outside Plant (OSP) fiber optic cable includes water-blocking characteristics and an armored jacket to prevent damage from rodents and the pressure created by the surrounding dirt and rock. 4.

6. 5. • Indoor/Outdoor cable (I/O cable) is designed to withstand the environmental conditions experienced outdoors. Dry water-blocking features, such as water-swellable Aramid, protect against water ingress. Materials used in the manufacture of the outer jacket are weather resistant and fungus resistant. UV resistance allows the fiber optic cable to withstand long-term exposure to sunlight without degradation. 6.

7. 7. • This cable option features fiber optic cable encased in a small OD stainless steel miniature armor. The 3mm outside diameter is more than 65% smaller and 75% lighter than standard interlocking armor and still maintains flexibility. The coiled armor offers protection and durability and may eliminate the need for conduit. This reduces the weight and surface area when compared to standard cable design, which helps to improve airflow within the data center. The single boot also allows for reversing polarity within the connector body. 8.

8. Available Cable Types

9. Available Connector Types

10. High Quality Guaranteed Our fiber optic cables are made by FOA (Fiber Optic Association) Certified technicians in the USA by Falcon Technologies Inc. using the latest epoxy injection and polishing systems for the highest quality and performance. The end faces of the Corning glass within our assemblies are machine polished, resulting in a much lower light loss than can be achieved by hand polishing. All Pre-Terminated Fiber products are guaranteed and 100% tested. Each assembly is individually scoped and tested for light loss to exceed minimum requirements for TIA test standards. Loss results are included with each assembly.

11. Request A Quote FIND US