Complete Guidance For Epson WF 2860 Setup | Free Driver, Mac & Manual Download

1. Complete Guidance For Epson WF 2860 Setup | Free Driver, Mac & Manual Download Get brief guidance for Epson WF 2860 setup. Also, get free download software for a driver, Mac, Manual. For, more queries reach us & get solutions. By Jermiah Fernandez

3. Epson WF 2860 is an All-in-One printer that prints at a resolution of 4800 * 1200 dpi. This printer supports printing, scanning, copying, and faxing operations. To set up the Epson WF 2860 printer, carry out the quick steps for Epson WF 2860 setup given on our web page.

4. Remove all the materials and tapes from the inside and outside of the Epson WF 2860 printer. • Plug the power cord between the rear side of the printer and an electrical outlet. • Lift the printer’s control panel, press the Power button, and set your language, country, and time. • Open the scanner unit and remove any packing materials in it. • Shake the new ink cartridges well before unpacking them. • Place the unpacked ink cartridge in the holder correctly. • Do the same to install the rest of the ink cartridges. • Once done, the Epson WF 2860 printer charges ink. It takes 5 minutes for the process to complete.

5. Now, the Charging is Complete message will be displayed on the printer’s LCD panel. • Draw out the paper cassette, place a few sheets of paper, and adjust the paper guides. • Push the paper cassette and proceed with the LCD panel instructions to customize the print settings. • If you want to send a fax on the Epson WF 2860 printer, connect a phone cord between a telephone wall jack and the LINE port of the printer. • Download the printer software from the manufacturer website and install it on your computer as per the on-screen guidelines. • Make sure to establish a connection between the printer and the computer. For, more information visit: https://airprint.us/epson-wf-2860/

6. Thank You